AMSOIL Racing Products Provided Exceptional Protection for Drag Racer

AMSOIL DELIVERS ‘SHOCKING’
PROTECTION IN DRAG RACING ENGINE

Preferred Customer and truck driver Paul Jordan of Butte, Mont. started racing a Junior Dragster at only 11 years old. At 14, he purchased a Plymouth* Duster,* which he’s dragraced since the early 2000s, competing in Montana, Idaho and the surrounding area. 

After 13 years of drag racing, the bearings in Jordan’s
Chrysler 408 showed virtually no signs of wear.

“A friend of the family talked my parents into bringing me out to the racetrack one day and from that point on I was hooked,” said Jordan. “I was only the second one in Montana to have a Junior Dragster at that point.” 

 

In 2007, Jordan built a Chrysler* 408 engine for his Duster. He used AMSOIL DOMINATOR® 15W-50 Synthetic Racing Oil (RD50) as the break-in oil and service fill.  

As you would expect, the engine constantly operates under severe conditions. It makes about 550 horsepower and regularly hits 5,000-6,000 rpm. 

Jordan estimates his Duster has made about 4,000 passes down the drag strip since 2007. 

“I’ve won five championships over the years, so I’ve made a lot of passes down a lot of tracks,” he said.

It uses six quarts of DOMINATOR Synthetic Racing Oil, a WIX oil filter as the primary filter and an AMSOIL Oil Filter as the secondary filter. Most notably, it has run on methanol fuel for the past three years, which is prone to attracting moisture and diluting the oil. 

“If you switch to methanol, the rule is you should change oil every other race,” said Jordan. Even so, he only changes oil once a year.

“There is no indication of any contamination,” said Jordan. “I look through it to see if there are any metal particles, but I’ve never had any. I probably could have put two years on the oil if I’d wanted to.”

He recently decided to tear down the engine for the first time since building it 13 years ago to refresh it, which typically includes installing new bearings, piston rings and honing the cylinders. He also wanted to make some modifications to increase power.

“I expected to open the engine, pull the bearing caps off and see a couple of them pretty much worn out and on the verge of failure,” said Jordan.

Instead, the inside of the engine looked clean and virtually free of wear. 

“It was pretty surprising when we pulled it apart, popped the bearings out and they looked nearly brand new,” said Jordan. “There’s no ridge at all on the cylinder walls, which is incredible. And I used to spray it with nitrous, too. The cylinders are in unbelievable condition. There are a few scuff marks, but nothing you’d expect for something that’s been abused for more than a decade. It was really shocking. And I can’t believe how clean it was; there was no buildup anywhere.”

Jordan said the crankshaft just needed to be re-polished. The car ran its best elapsed times at the drag strip in 2019, meaning it never lost power over the years.

“I could reassemble the engine as-is and go another 13 years,” said Jordan. “I have no reason to believe, other than AMSOIL, that the engine lasted as long as it did. I use AMSOIL in everything I own. I use it in my pickup truck, my semi, my race car...if AMSOIL made shampoo, I’d use that, too.” 

Jordan adds that he used AMSOIL Super Shift® Racing Transmission Fluid (ART) in the TF727 transmission used in the car from 2003 to 2017 without a rebuild.

“I truly appreciate the fine lubrication products offered by AMSOIL, and you can expect my loyalty for many more years to come,” he said. 

AMSOIL Racing Products

Quality filtration is equally as important as quality lubrication.

Mark Nyholm-  Technical Product Manager

Filters are often overlooked, but they are integral to keeping oil clean and performing at its best.

It’s often said that motor oil is the lifeblood of the engine. We depend on it to prevent wear, maintain cleanliness, minimize operating temperature and act as a seal. Should the oil become contaminated, its ability to perform these tasks can be greatly impaired. Dirty oil can cause piston ring wear, leading to increased oil consumption, and it can also accelerate wear in bearings and cylinders. Engine contaminants cannot be eliminated, but they can be controlled with proper filtration. Proper filtration helps keep oil clean and flowing freely, ensuring the lubricant will be able to perform its necessary tasks continuously.

At a basic level, all filters are designed to separate solid particles from air or fluid and keep them from entering into places where they are not wanted. Think about your morning coffee and what would happen if the coffee filter failed to keep the coffee grounds out of the brewed beverage. You would have very thick and sludgy coffee, not unlike the sludge that can build up in engines with severely contaminated motor oil. In the same way as coffee filters keep grounds out of your java, oil filters capture contaminant particles within the oil to prevent them from causing engine wear. This is important because contaminated oil can reduce engine life from 60 to 80 percent. You probably can see how a poorly designed filter could lead to an engine filled with gunk.

When discussing filters and filter performance at your next barbeque, make sure you talk about the four main criteria: flow, efficiency, capacity and particle size. Proper flow is important so oil can get to critical parts of the engine. If the filter creates an abnormal restriction of oil flow, it can lead to oil starvation and catastrophic engine damage. Efficiency is a measure of a filter’s ability to adequately remove contaminants of a particular size that may critically harm the application. The greater the efficiency, the better that filter is at removing contaminant particles. Capacity describes the amount of contaminants a filter can hold and still flow oil properly. Capacity is described as the service interval or useful life of the filter.

Most of these particles are smaller than what is visible with the human eye. Particles of greatest concern for most applications are 5-25 microns, which is smaller than the diameter of a human hair. Generally, if a filter has large openings, like a window screen, it will have poor efficiency but will flow very well. As screen holes get smaller, more small particles will get caught in the screen. The trade-off is that flow will be restricted. Balancing these two design features is an essential part of filter design.

The type of filter media used in a filter has a big impact on performance. Four major types exist in today’s marketplace, including open-celled foam, cellulose, cellulose/synthetic composite and full synthetic. Synthetic filter media has several advantages over the other filter media materials. Synthetic media has higher capacity and can be modified to a wide range of efficiencies. Synthetic media also removes smaller contaminant particle sizes, and is suitable for extended service intervals because of the increased capacity for contaminants. It is also typically more durable than other filter media, like paper-based materials that use sticky resins to keep fibers from falling apart over time. Cellulose media used in lower-quality filters have larger fibers and bigger holes that let more contaminants pass through the filter. Synthetic filter media is chemically manufactured rather than derived from a tree, like paper, so the fibers are much smaller and specifically designed to capture smaller particles while still keeping good flow of oil through your engine. Ah, the magic of synthetic materials.

AMSOIL incorporates synthetic media into AMSOIL Ea® Filters, which rank among the highest-efficiency filters available. Better filtration equals reduced engine wear. In addition, the extra capacity to hold more contaminants means they keep filtering over extended intervals. When used in conjunction with AMSOIL synthetic motor oil, AMSOIL Ea Oil Filters designated with product code EaO are guaranteed for 25,000 miles/ one year (15,000 miles/one year in severe service). Smaller Ea Oil Filters designated with product code Ea15K are guaranteed for 15,000 miles/one year in normal and severe service. Good oil and good filtration go hand in hand, and AMSOIL Dealers have the products to offer the best of both to their customers.

Maximum Hydraulic System Protection

Certain hydraulic systems, including those installed in log splitters, skid steers and small tractors, are often operated seasonally or intermittently, then stored for extended periods. Although checking and changing hydraulic oil is sometimes an afterthought, fluid maintenance is important to ensure optimum protection and performance and maximum equipment life. AMSOIL synthetic hydraulic oils can provide significant benefits and cost savings over conventional hydraulic oils.

Reduced Heat

The synthetic construction of AMSOIL synthetic hydraulic oils can reduce heat in hydraulic systems, leading to better viscosity retention; less varnish build-up, oxidation and component wear (including hoses); longer seal life; and better overall system performance.

Cold-Weather Performance

Mobile hydraulic equipment often sits in the elements while on a job site, causing many conventional hydraulic oils to thicken in the cold and lead to equipment damage such as excessive pump wear due to cavitation, blown hoses, broken shafts and extended warm-up times that waste fuel. AMSOIL synthetic hydraulic oils are formulated for better coldtemperature characteristics than petroleum oils, helping reduce or eliminate many of these issues.

All-Season Functionality

To eliminate some of the problems associated with temperature changes, many mobile hydraulic equipment owners switch oil viscosities with the seasons. AMSOIL synthetic hydraulic oils are high-viscosity-index formulations that can eliminate the need for seasonal changes. It's possible to run an AMSOIL ISO 32 or ISO 46 hydraulic oil successfully year-round in all but the most extreme cold conditions.

Hose Life Preservation

Cold and heat wreak havoc on hydraulic system hoses and seals. Cold, thick fluid can cause pressure spikes and extremely hot fluid breaks down hoses and seals over time, leading to leaks and wasted hydraulic fluid. The superior cooling and flow properties of AMSOIL synthetic hydraulic oils help preserve hose integrity.

AMSOIL Synthetic Anti-Wear Hydraulic Oil

AMSOIL Synthetic Anti-Wear Hydraulic Oil effectively inhibits oxidation to help prevent acid formation and viscosity increase, resist carbon and varnish deposits and inhibit rust and foam (providing smooth hydraulic operation). It contains an effective zinc-based antiwear/ antioxidant additive that controls wear in high-speed, high-pressure vane and gear pumps while meeting the lubrication requirements of axial piston pumps with bronze-on-steel metallurgy.

• Maximum cold-temperature performance
• Formulated for long life
• Superior anti-wear protection
• Contains rust, oxidation and foam inhibitors
• Hydrolytically stable and readily separates from water
• Available in ISO 22, 32, 46 and 68 viscosity grades

AMSOIL Synthetic Multi-Viscosity Hydraulic Oil

AMSOIL Synthetic Multi-Viscosity Hydraulic Oil's blend of high-viscosityindex base oils and performance additives provides all-season protection and reliable operation at a lower cost. Its proven wear resistance and varnish-control deliver maximum hydraulic system performance and life, and it is additionally tailored to promote energy efficiency and foam suppression.

• Provides all-season performance at a lower cost
• Reduces maintenance costs
• Resists varnish, viscosity loss and chemical breakdown
• Increases system performance and responsiveness
• Helps reduce energy costs
• Available in ISO 22, 32, 46 and 68 viscosity grades

AMSOIL Biodegradable Hydraulic Oil

AMSOIL Biodegradable Hydraulic Oil (BHO) is a premium-performance, ISO 46 hydraulic oil that exhibits high biodegradability and low aquatic toxicity, along with superior oxidative stability, excellent low-temperature performance and outstanding results in laboratory and extended-duration pump testing. It contains antioxidants that prolong oil life and foam inhibitors that help promote problem-free operation.

Keeping Engines Clean with AMSOIL

Though conventional motor oil quality has improved over the past 30 years, this progress is also offset by emission-reduction strategies, including variable valve timing (VVT), which strangles the engine a little tighter and makes it run hotter.

The average motorist has never even heard of variable valve timing, but it’s a critical component in the operation of a vehicle. Almost every vehicle manufacturer has published a bulletin stating that the number one cause of variable-valve-timing system problems is small amounts of residue and sludge. In other words, cleanliness is absolutely essential.

In the old days, the engine’s intake and exhaust valves were set to open and shut at specific points in the four-stroke cycle for a set amount of time. With variable valve timing, engines can adjust the timing for when and how long these valves open and shut by relying on a combination of sensors and mechanical systems, many critically located on the camshaft and crankshaft. When these components get gummed-up with sludge or deposits, it can lead to poor performance and costly repair bills.

Because AMSOIL synthetic motor oil resists oxidation and breakdown in high heat, it is less prone to produce the varnish and sludge that damages these critical sensors.

Keeping engines clean by using AMSOIL synthetic motor oils helps them last longer. Cleanliness reduces wear, ring sticking and emissions while helping ensure all these components operate as designed.

More information  on AMSOIL Synthetic Motor Oil

AMSOIL SYNTHETIC MOTORCYCLE OIL DELIVERS WHAT BIKERS WANT

According to an industry survey, U.S. bikers value engine  protection and quality above all else.

Click for larger image

Over 80 percent of survey respondents rate engine protection and quality as important or very important when selecting motorcycle oil. Viscosity grade and motorcycle specific formulations are also important or very important to a majority of respondents. Interestingly, price was the sixth most important factor, indicating most bikers are willing to pay a premium for motorcycle oils that help them get the best performance and most years from their engines. Results indicate what motorcyclists want in a motor oil is exactly what AMSOIL Synthetic Motorcycle Oil delivers.

Keeping Bikes Longer

The demographics of the U.S. motorcycle fleet may have played a large role in how bikers responded to the survey. Sales of new bikes, as reported by the Motorcycle Industry Council, reached 452,400 in 2012. However, over half of the 10 million bikes in the U.S. fleet are more than seven years old while almost 25 percent predate 1995. Bikers are keeping their motorcycles longer and selecting lubricants that help them do so by maximizing engine protection and longevity.

MOTORCYCLE SPECIFIC FORMULATIONS

Bikers also value motor oils formulated specifically for motorcycles  demonstrating that many understand the unique challenges motorcycles present to lubricants and the need to use lubricants formulated to meet those challenges. Motorcycles run hotter and at higher RPM  than passenger cars/light trucks – conditions that require robust oils formulated to resist viscosity loss due to extreme heat and mechanical shear. In many bikes, the oil must lubricate the engine, transmission and primary chaincase simultaneously. Effectively protecting against engine and gear wear while delivering superior clutch performance requires a balanced oil tailored to protect all critical areas. Passenger car/light truck motoroils simply aren’t designed to meet the needs of motorcycles. However, 59 percent of respondents indicated an API-certified oil was very important or important, indicating there is still limited knowledge of lubricant specifications and their applicability.

Synthetics on the Rise

Click for larger image

Full-synthetic oils rate as important or very important to 42 percent of respondents. Where bikers once had to be convinced of synthetics’ superiority, many now understand synthetics are better-suited to protect their engines in the toughest riding conditions. The survey also found that the strength of brand reputation and explicit product quality claims are two key differentiators in the market. The AMSOIL brand signifies industry leading quality due to the company’s presence at the largest and most influential motorcycle rallies in North America – including Sturgis, Daytona Bike Week and Laconia Motorcycle Week – and its sponsorships in the motorcycle racing markets – including AMSOIL Arenacross, Erik Buell Racing, Monster Energy Supercross and Loretta Lynn’s AMA Amateur National Motocross Championships.

More importantly, AMSOIL Synthetic Motorcycle Oil lives up to its performance claims delivering real world benefits experienced by countless bikers. Formulated specifically to meet the demands of motorcycles, its exceptional high temperature film strength provides maximum wear protection. AMSOIL Synthetic Motorcycle Oil promotes superior engine cleanliness, wet-clutch performance and transmission protection. Its performance has earned AMSOIL Synthetic Motorcycle Oil a strong reputation for quality, delivering the performance bikers want. 

AMSOIL Synthetic Motorcycle Oil Information

AMSOIL Signature Series Synthetic Motor Oil Outperforms Competition in New Study

Nine synthetic motor oils were compared to AMSOIL Signature Series 5W-30 Synthetic Motor Oil (ASL). When it was all said and done, Signature Series demonstrated the best overall performance and cost-effectiveness.

Click for larger image

Since AMSOIL introduced the first synthetic motor oil to meet American Petroleum Institute (API) service requirements in 1972, many other synthetic motor oil brands have been introduced. Today, synthetics are widely viewed as superior to conventional motor oils, and demand continues growing, but how do other brands compare to AMSOIL?

A Study of SAE 5W-30 Synthetic Motor Oils

Signature Series 5W-30 Synthetic Motor Oil and nine other synthetic oils were subjected to five industry tests conducted according to American Society of Testing and Materials (ASTM) methodology. The overall annual cost of each oil was also compared. The study included synthetic motor oils exclusively for a number of reasons. First, most motorists now understand that synthetics provide increased performance benefits compared to conventional oils, so convincing consumers of synthetics' superiority is less of an issue. Second, while conventional motor oil sales remain flat, demand for synthetics continues to increase. Third, testing only synthetics facilitates an apples to apples comparison.

Methodology

Testing examined several important areas of motor oil performance, including resistance to deposit formation, wear protection, high-temperature stability, resistance to acid formation and cold temperature performance.

Click for larger image Four-Ball Wear Test results indicate significant differences in relative wear protection between oils. The top four performers limited wear scars to under 0.40 mm. AMSOIL Signature Series Synthetic Motor Oil demonstrated the best wear protection in the Four-Ball Wear Test. Click for larger image  AMSOIL Signature Series Synthetic Motor Oil tested two numbers higher than the nearest competitor.

Each oil was subjected to the following ASTM test methodologies:

• Thermo-Oxidation Engine Oil Simulation Test (TEOST, ASTM D 6335)
• NOACK Volatility Test (ASTM D 5800)
• Four-Ball Wear Test (ASTM D 4172 Mod.)
• Total Base Number (ASTM D 2896)
• Cold Cranking Viscosity (ASTM D 5293)

Test results published in A Study of SAE 5W-30 Synthetic Motor Oils describe and represent properties of oils that were acquired from November 2012 to December 2012. Results do not apply to any subsequent reformulations of such oils or to new oils introduced after completion of testing. All oils were available to consumers at the time of purchase. An independent, third-party lab conducted all tests. Formulations were coded to reduce the potential for bias, and samples were tested in random order. An appropriate number of trials of each oil were run to produce results at the 95 percent confidence level when compared to Signature Series Synthetic Motor Oil. The 95 percent confidence level only applies when comparing AMSOIL Signature Series Synthetic Motor Oil to the other 5W-30 oils. The 95 percent confidence level does not apply when comparing the other oils to one another.

Candidate Oils

The following nine oils were selected for the study:

• Castrol Edge® with Titanium Fluid Strength Technology®
• Lucas Synthetic
• Mobil 1™ Extended Performance
• Pennzoil Ultra™
• Petro-Canada SUPREME Synthetic™
• Quaker State Ultimate Durability™
• Red Line High Performance Motor Oil
• Royal Purple High Performance Motor Oil
• Valvoline SynPower® Full Synthetic Motor Oil

All oils are 5W-30 viscosity and recommended for applications requiring API SN/ILSAC GF-5 specifications.

Results

AMSOIL Signature Series Synthetic Motor Oil displayed the best results in the Four-Ball Wear, Total Base Number and Cold Crank Viscosity Tests. Results in the NOACK and TEOST Tests were also impressive, proving Signature Series Synthetic Motor Oil's excellent high-temperature performance. Other oils performed well in some tests, but not as well in others, illustrating the challenge inherent in formulating a high-quality motor oil that performs well in tests designed to assess optimum engine protection and life. In addition to delivering outstanding performance, Signature Series Synthetic Motor Oil provides maximum cost-effectiveness - even at retail pricing. Because they buy at wholesale, Dealers and Preferred Customers receive even more value. In the end, no other oil demonstrated itself capable of providing the overall performance in these tests and cost effectiveness of Signature Series.

Click for larger image

Although synthetic motor oils are known to provide increased low temperature performance compared to conventional oils, results suggest performance differences between formulations. AMSOIL Signature Series Synthetic Motor Oil demonstrated the lowest cold crank viscosity (3,727 cP).

Click for larger image

 Results demonstrate a range of performance differences. Only Castrol Edge with Titanium Fluid Strength Technology and AMSOIL Signature Series Synthetic Motor Oil limited total deposit weight to 5 mg or less.

AMSOIL 5W-30 Signature Series Synthetic Motor Oil

AMSOIL Synthetic Lubricants Proven in Las Vegas Taxi Fleet Field Trial

Click for information at AMSOIL.com

With modern vehicles producing increased heat, the ability of lubricants to protect against sludge and deposit formation is becoming more important. Motor oils and transmission fluids must demonstrate increased thermal stability throughout longer drain intervals for components to last as designed.

AMSOIL synthetic lubricants are formulated with reserve protection to withstand heat and its negative effects. To demonstrate it, AMSOIL Signature Series Synthetic Motor Oil and Signature Series Synthetic Automatic Transmission Fluid were put to the test in taxi cabs operating in the searing desert heat of Las Vegas, Nev.

Taxi Fleet

Taxis are notoriously hard on lubricants due to excessive idling and constant stop and go driving loaded with passengers and cargo. Las Vegas summer temperatures added to the challenge, topping 100ºF during this field study.

Six vehicles operated with AMSOIL synthetic lubricants for 18 months. The vehicle selected for further analysis – a 2010 Dodge Charger equipped with a 2.7L V6 engine and 4-speed automatic transmission – accumulated 7,033 hours (102,582 miles) prior to the engine and transmission disassembly. Given the unusually high amount of idle time, maintenance intervals were determined in hours rather than miles. Signature Series 0W-20 Synthetic Motor Oil (ASM), changed every 900 hours or approximately 15,000 miles, was used in the Charger’s engine, while the transmission used Signature Series Multi-Vehicle Synthetic Automatic Transmission Fluid (ATF), which was not changed during the study.

The Charger operated throughout Las Vegas up to 24 consecutive hours each day, with the engine shut down only during refueling and personnel changes. Average speed was 14.6 mph, while the EPA indicates the average speed for city driving is 21.2 mph, illustrating the excessive amount of idle time and stop and go driving.

Results

Transmission components prone to the effects of lubricant failure, including the valve body and clutch plates, revealed virtually no sludge and little wear after operating 7,033 hours (102,582 miles) on a single fluid change. Although the Charger carried a recommended transmission fluid change interval of 60,000 miles in severe service, Signature Series Multi-Vehicle Synthetic ATF continued providing superior protection well beyond the severe-service recommendation, confirming its ability to provide reserve protection.

Engine components susceptible to the formation of harmful sludge, including the oil pan, oil pickup tube and cylinder heads, revealed virtually no sludge, earning high ratings from an independent calibrated rater. Results prove the ability of Signature Series Synthetic Motor Oil to safely extend drain intervals in severe service. Complete results are available in the Las Vegas Taxi Fleet Field Study (G3118) available from AMSOIL Inc.

Click for larger image

Following over 100,000 miles of severe service, the transmission case and cylinder
head contained virtually no sludge, confirming the superior heat resistance of
Signature Series Synthetic Motor Oil and Signature Series Synthetic ATF.

Click for larger image

Natural gas is an up-and-coming alternative to gasoline and diesel.

From stationary engines to heavy-duty equipment and even passenger cars, natural-gas engines are becoming more prominent.

Mark Nyholm | Technical Product Manager - Heavy Duty - AMSOIL Inc.

 Alternative fuels have been the talk of the town for over 10 years now, and the quest to reduce engine emissions, fuel costs and dependence on foreign oil often leads to fuels other than gasoline or diesel. Natural gas is one of these upand-
coming alternative fuels. For many of us, natural gas heats our homes and runs our stoves, water heaters and clothes dryers. This low-carbon fuel is making its way to powering a variety of natural gas engines for both stationary and vehicular applications. Compared to the relatively complex chemical structures of gasoline and diesel, natural gas has a relatively simple chemical makeup primarily composed of methane. When natural gas is burned, it produces fewer pollutant emissions than coal or petroleum products, which makes it a natural choice on the quest to reduce engine emissions.

Three varieties of natural gas are used: compressed natural gas (CNG), liquefied natural gas (LNG) and renewable natural gas (RNG) or biomethane. CNG is natural gas compressed into high-pressure containers for storage or transport. LNG is achieved by cooling natural gas to -260°F at atmospheric pressure. LNG is 1/600th the volume of natural gas at atmospheric temperature and pressure, making it ideal for applications that are
weight or space limited. Biomethane, or biogas, is a naturally occurring, renewable energy source created by the breakdown of organic matter, such as farm and landfill waste. This low-carbon organic waste can be processed to high-quality natural gas suitable for use in pipeline or a variety of stationary and vehicular engines.

Vehicular natural gas engines are used in many mobile applications, including public transit buses, refuse haulers, delivery trucks, school buses and many other medium-/heavy-duty trucks. Natural gas has even made its presence into a few small passenger vehicles such as the Honda Civic; and Ford, General Motors and Ram have natural-gas-powered light-duty pickup trucks. Because of the limitations in engine availability, the heavy-duty market is primarily where natural gas is being used today. The limited number of natural-gas filling stations has also put constraints on the expansion of applications outside of engines either directly connected to the natural-gas pipeline or to vehicles that return to base daily. So if you are looking for natural-gas-powered vehicles, think locally and look at medium- to heavy-duty applications performing duties similar to diesel-powered vehicles.

Nearly all the natural gas used in North America is produced domestically, allowing local control over the energy supply. The cost of natural gas is substantially less than diesel or gasoline, resulting in reduced fuel costs. Many cities and states are looking to natural gas for two main reasons: First, natural gas engines are much quieter than their diesel counterparts. An idling diesel engine can be up to 10 times louder than a natural-gas engine. Because these engines often operate in the public sector, reducing engine noise creates more peaceful environments for operators, passengers and bystanders alike. Second, natural gas produces lower levels of nitrogen oxides and particulate matter emissions than diesel. Complying with the emissions regulations set forth by the Environmental Protection Agency (EPA) or the California Air Resources Board (CARB) has become essential to conducting business in North America.

Natural-gas engines have specific lubrication demands that differ from those of diesel and gasoline engines. AMSOIL continues to be at the forefront of natural gas engine lubrication and is involved in various natural-gas organizations. We have run multiple field trials proving our superior lubrication chemistry, and we continue to strive to improve lubrication for these engines through analytical and laboratory testing. AMSOIL Synthetic Vehicular Natural Gas Engine Oil (ANGV) and AMSOIL Synthetic Stationary Natural Gas Engine Oil (ANGS) both feature a low-ash formulation to minimize deposits that can lead to engine knocking and valve recession, while anti-wear additives provide excellent wear protection. Their thermal stability minimizes oxidation, and their low volatility reduces oil consumption. With oil analysis, both are proven for use in extended-drain-interval applications.

Although natural-gas vehicles currently represent a small percentage of the overall vehicle market, steady growth over the next decade is expected. A study from Pike Research (a research and consulting firm focusing on clean technology markets) forecasts worldwide sales of natural-gas trucks to grow at a compound annual growth rate (assuming a steady rate of growth much like the rate of return on an investment) of 14 percent between 2012 and 2019. The vehicular natural-gas market represents another arena of opportunity for AMSOIL Dealers, now and in the future. Remember, although these heavy-duty engines are similar to diesel engines, they do come with some very important differences that you should be aware of. Take a little time some evening and Google “natural-gas vehicles.” Prepare to be astonished at the quantity of information about natural gas that has made its way into our lifestyles already.

For more information on AMSOIL Synthetic Motor Oils including Synthetic Natural Gas Engine Oil and Synthetic Diesel Oils.

AMSOIL Synthetic Motorcycle Oil Demonstrates Outstanding Protection in Extreme Heat

Protection against extreme heat is of the utmost importance in motorcycle applications. The aircooled V-twin engines used in Harley-Davidson motorcycles can get extremely hot, particularly when idling or traveling at low speeds.
If a motorcycle oil cannot withstand hot operating temperatures, its ability to provide adequate engine protection is compromised. AMSOIL Synthetic Motorcycle Oil is formulated to withstand extreme heat conditions beyond the hottest temperatures motorcycles typically experience, providing peace of mind that motorcycles receive outstanding protection and performance no matter how extreme the operating conditions.

Dynamometer Testing

To demonstrate its extreme-heat protection qualities, AMSOIL 20W-50 Synthetic Motorcycle Oil (MCV) was subjected to a dynamometer test designed to simulate conditions even more extreme than the demanding stop-andgo driving conditions of a motorcycle rally or parade route.
A 2012 Harley-Davidson FXDB Dyna Street Bob motorcycle equipped with AMSOIL 20W-50 Synthetic Motorcycle Oil was operated for 68.5 minutes at low speeds, with significant idle time broken by engine revving. Like most Harley- Davidson motorcycles, the Dyna Street Bob features an air-cooled V-twin engine, which relies on cooling fins arrayed along the cylinder walls to conduct heat away. To create the most-severe operating conditions possible, the electronic temperature controls, which safeguard the motorcycle when temperatures reach dangerous levels, were deactivated. The test subjected the oil and engine components to intense heat not normally experienced in the real world, with cylinder temperatures reaching more than 500°F.
The extreme temperatures were no match for AMSOIL Synthetic Motorcycle Oil. After nearly 70 minutes of torturous testing and heat exposure, oil analysis revealed no change in oil viscosity and only minor levels of oxidation, TBN depletion and wear.
Not only did AMSOIL Synthetic Motorcycle Oil prevent the engine from overheating and seizing, it did so without losing chemical integrity or ability to protect vulnerable engine components, demonstrating that it provides outstanding protection even in compromising and severe high-temperature riding and idling conditions not experienced by most riders.

 As temperatures climbed to more than 500°F in the cylinders, an infrared camera revealed the redhot conditions that assaulted the engine components and oil.

Viscosity

As heat breaks oil down, the viscosity typically rises until it is significantly out of grade and must be changed. AMSOIL 20W-50 Synthetic Motorcycle Oil showed no change in viscosity following the extreme-temperature test, demonstrating its outstanding resistance to thermal breakdown and its ability to provide excellent protection in the most severe conditions.

Click for larger image

Oxidation

AMSOIL 20W-50 Synthetic Motorcycle Oil demonstrated outstanding oxidation resistance, allowing it to control deposits and keep motorcycle engines clean and operating at peak efficiency.

Click for larger image

TBN

AMSOIL 20W-50 Synthetic Motorcycle Oil successfully maintained its Total Base Number (TBN), allowing it to effectively combat corrosive acids.

Click for larger image

Wear Metals

AMSOIL 20W-50 Synthetic Motorcycle Oil demonstrated outstanding wear protection throughout the extreme-temperature test, with oil analysis results showing only trace levels of wear metals.

Click for larger image

AMSOIL 20W-50 Synthetic Motorcycle Oil information

After 1.6 Million Miles 18 Wheeler Shows No Signs of Quitting

After 1.6 million miles on the original drivetrain and 1.1 million on the factory-rebuilt engine, Jerry Pruett and his AMSOIL-lubed Kenworth show no signs of retiring.

When AMSOIL Dealer Jerry Pruett of Woodhull, Ill. purchased his new 1999 Kenworth over-the-road truck in December 1998, he thought it might run forever if he installed AMSOIL synthetic lubricants. Now with more than 1.6 million miles on the drivetrain and over 1.1 million on the factory-rebuilt engine, "forever" still remains in sight.
The mileage is even more impressive considering how little work the truck has required. The Detroit Diesel Reliabilt^® engine still has virtually all of its original components, including the turbo and fuel injectors. The truck accumulates 2,300-3,000 miles a week hauling loads averaging 27,000-35,000 pounds, with some up to 80,000.
The reliability of the drivetrain is also notable. Though the clutch has been replaced a couple times, the transmission hasn't been touched. "I've done nothing to the transmission. All the gears in it are at 1.6 million miles," said Pruett. The differential gears are also original to the truck.
Pruett runs SAE 60 Super Heavy Weight Synthetic Racing Oil (AHR) in the transmission. He uses Severe Gear^® SAE 190 Synthetic Gear Lube (SRN) in the differentials, although AMSOIL primarily recommends 75W-90 Long Life Synthetic Gear Lube (FGR) in over-the-road applications. "A little bit thicker oil couldn't hurt with the high miles," said Pruett.

AMSOIL Helps Increase Life of Defective Engine

The truck was originally equipped with a Detroit Diesel engine that, unknown to Pruett, contained a manufacturing defect known to cause catastrophic failure early in the engine's service life. Pruett initially installed Shell Rotella during the break-in period. "I wanted the rings to seat prior to switching to AMSOIL," he said. At about 140,000 miles, he installed Series 3000 Synthetic Heavy Duty Diesel Oil (HDD).
With 506,000 miles on the engine, the number three piston failed. "In talking with the mechanics, I found out there was a defect on these engines, and some blew around 300,000 to 375,000 miles," said Pruett. "In one instance, a rod came through the engine and punctured the computer. I felt my engine lasted as long as it did because of AMSOIL." When the mechanics removed the cylinder heads, the original hone marks were still visible on the cylinder walls. "The mechanic said the engine was not wearing out; the oil was doing a great job. Had it not been for the piston failure, it could have run forever."

Detroit Diesel Reliabilt^® Engine

Despite the engine warranty having expired 6,000 miles earlier, Pruett presented his case to Detroit Diesel. "I felt Detroit Diesel was taking advantage of me. Other guys using any old oil were receiving warranty coverage because their engines failed sooner. I told them I was using the best oil in the world and, because of that, the engine lasted longer," said Pruett. "To have that engine last past the warranty was a surprise to them, I think." Detroit Diesel agreed to provide Pruett a factory-overhauled engine at cost, in addition to $4,500 for installation.
The factory-rebuilt engine has since powered the truck for 1.1 million miles, requiring virtually no repairs. "I haven't even pulled the cylinder head off this thing," Pruett said. "I didn't replace the water pump until accumulating over 900,000 miles. Usually a water pump lasts 350,000 miles on a good day." As with the previous engine, Pruett installed Shell Rotella during the break-in period prior to switching to Series 3000 Synthetic Heavy Duty Diesel Oil.
The lone repair required was replacement of the camshaft at about 100,000 miles, barely out of the break-in period when still using Shell Rotella. Pruett believes the camshaft was original to the engine and not replaced when the engine was factory re-built by Detroit Diesel.
With close to 800,000 miles on the engine, Pruett switched to higher-viscosity 15W-40 Synthetic Heavy Duty Diesel and Marine Oil (AME) to guard against excess oil consumption common as engines age.
During a routine 31-point inspection completed when Pruett had a faulty sensor replaced, the mechanic remarked how nice the turbo looked. "They thought it had only been in for a couple months," said Pruett. "It was 12 years old." Pruett credits the Donaldson Endurance™ Heavy-Duty Air Filter for the turbo's longevity. "I was sold on the air filter from day one," he said. "Throttle response was quicker, it boosted the horsepower a little bit and turbo noise decreased."

100,000-mile Oil Changes

Pruett also uses the AMSOIL DUAL GARD^® By-Pass Oil Filtration System fitted with two EaBP110 By-Pass Oil Filters. Regular oil analysis continually indicated the oil was suitable for continued use, allowing Pruett to establish an oil change interval of once per year, or about every 100,000 miles, based on historical data. The EaBP110 By-Pass Oil Filters are changed twice a year, or about every 50,000 miles. Practicing extended drain intervals saves a considerable amount of money each year compared to using conventional oil and standard drain intervals. "Some guys are spending up to $1,200 a year on oil changes when they could be spending half that with AMSOIL," said Pruett. "They're throwing their money away."

Excellent Fuel Economy

Additional savings are realized each time Pruett fills his diesel tanks. "The truck really kind of scares me; it runs so good. I'm still getting about 7 mpg," said Pruett. During a run from Indianapolis, Ind. to St. Louis, Mo., the truck achieved 9.7 mpg. "The truck is capable of that mileage if I can just keep my foot out of it," said Pruett. He has used AMSOIL Diesel Concentrate (ADF) since day one, which not only helps fuel economy but, according to Pruett, has contributed to the fuel injectors lasting as long as they have. He also keeps AMSOIL Cold Flow Improver (ACF) on hand and uses it when conditions dictate.

No End in Sight

Pruett's truck serves as a rolling billboard for AMSOIL. It's covered in AMSOIL decals, along with the contact information for Pruett's AMSOIL Dealership. He shares his AMSOIL story with truckers at every opportunity. Pruett turns 62 in January and has thought about retiring, but, unfortunately for him, his truck has not. "I really want to see how far this truck can go, so I keep on trucking away."

Oil Additives Can Offset the Careful Balance of a Well-Formulated Motor Oil

An overabundance of anti-wear agents, for example, can lead to reduced resistance to corrosion.

Dan Peterson - Vice President Technical Development AMSOIL Inc.

I don't get up on my soapbox very often – partly because I have put on a few extra pounds and don't want to break the box, and partly because it's just not my personality. Not a lot of things really get to me, but when I come across something that does, you don't want to be with me in the car for a long drive. One of these things is engine oil additives. The last time I stopped by the local parts store to pick up a tool for a brake job on my Ford Fusion, I stood in the aisle for a full 10 minutes looking at the huge display of engine oil additives. I was not in a hurry, so I picked up a dozen or so and read the marketing claims.

Wow; it seems almost any internal engine problem in the world can be solved simply by using an engine oil additive. "Restores engine life, eliminates dry starts, eliminates engine noise, restores parts' surfaces AND compensates current wear!" Now I see why people buy all these oil additives. Too busy or just not interested in taking care of your vehicle? Just wait until you have a problem and then buy a solution at the local parts store and you are back in business. Our instant-gratification culture pushes us into believing in quick solutions. In reality, there are very few quick solutions that can correct years of neglect in any area of life, including your internal combustion engine. Very few, if any, engine oil additives solve engine issues overnight or somehow restore engines to their original condition. So how do you get the longest, trouble-free life out of your engine? Use a highquality, trusted brand of synthetic motor oil regularly and don't add any engine oil additives. Formulating a motor oil to perform all the critical jobs required by your engine is a balancing act. You can't just focus on improving one property without testing and evaluating the impact on all critical oil properties. Many times, use of additives improves one property, but causes other properties to take a nosedive. 

Formulating synthetic motor oils is a core strength developed over the past 40 years at AMSOIL, and it is not an easy task. Motor oils need to protect engines against abnormal wear, excessive varnish, sludge, rust and corrosion and damaging foam. Motor oils also need to remove heat, help meet fuel economy standards, keep engine seals from leaking and keep catalytic converters working effectively over their projected lives.

Many negative outcomes derived from using engine oil additives have been documented over the years, including accelerated corrosion, excess oil thickening in cold temperatures and increased deposit formation. Most of these negative outcomes are relatively complicated chemical interactions, but just like your family is interconnected, so is the chemistry in your motor oil. When you add Uncle Buck to your family for a week, you and the kids all have a lot more fun staying up late and listening to stories, but he upsets the family balance. The kids have black circles under their eyes from staying up too late, you argue with your spouse about a few choice new words the kids picked up and you have to clean up cigar butts all over the garage when he finally leaves. Seems fun at first, but a week-long visit proves having Uncle Buck live with you for good isn't such a good idea.

The chemicals in motor oils are all interconnected and work together like a family unit to provide all the important properties required to keep your engine operating well. Most motor oils are designed with a measured amount of wear protection and deposit control. The problem comes when you add a whole bunch of extra or new wear protection or deposit control, and it ends up creating corrosion or destroying coldtemperature properties. Motor oils that perform well have some Uncle Buck built in, but at an appropriate level that does not upset critical chemistry in other areas designed to keep your engine running smoothly over the long run.

If you want a more detailed explanation by industry experts, a recent Noria announcement outlined that "Aftermarket oil additives can backfire." In the book, "Practical Handbook of Machinery Lubrication," the following description is listed:

"Increasing the percentage of a certain additive may improve one property of an oil while at the same time degrade another. When the specified concentrations of additives become unbalanced, overall oil quality can be affected. Some additives compete with each other for the same space on a metal surface. If a high concentration of an anti-wear agent is added to the oil, the corrosion inhibitor may become less effective. The result may be an increase in corrosion-related problems."

It's a much fancier way of saying too much of your Uncle Buck is not good for your marriage. Next time you talk to someone who is contemplating using one of those flashy new engine oil additives, tell them about the importance of maintaining the critical balance in motor oil and what can happen when it becomes unbalanced. 

AMSOIL Synthetic Motor Oils 

3,000-Mile Oil Change Comes Under Fire

The standard 3,000-mile oil change interval is under attack. Promoted for years by most motor oil companies and quick lube businesses as an essential part of proper vehicle maintenance, the public has become much more skeptical in recent years. In fact, searches for "3,000 mile oil change" in top Internet search engines such as Google and Yahoo! primarily yield articles and blog postings that challenge the practice and refer to it as a "scam" or "myth."

AMSOIL synthetic motor oil was introduced in 1972 as the only motor oil on the market recommended for 25,000-mile/one year drain intervals, and the company has spent much of the last 36 years as the lone voice promoting the benefits of extended drain intervals. However, AMSOIL has recently welcomed an increasing number of companies and organizations to the party. Although they still don't recommend drain intervals as long as AMSOIL recommendations, the momentum is growing.

Vehicle manufacturers have mostly recommended oil change intervals exceeding 3,000 miles in recent years. In fact, most recommend intervals of 5,000 miles or more. Ford Motor Company recommends drain intervals of 7,500 miles in its model year 2007 and newer vehicles, while other manufacturers incorporate oil monitoring systems in their newer vehicles that allow motorists to extend drain intervals even further.

In its December 2006 issue, Consumer Reports encourages drivers to follow the longer oil change recommendations of vehicle manufacturers, saying, "Although oil companies and quick-lube shops like to promote this idea [that engine oil should be changed every 3,000 miles], it's usually not necessary. Go by the recommended oil-change schedule in your vehicle's owner's manual. Most vehicles driven under normal conditions can go 7,500 miles or more between oil changes. Some models now come with a monitoring system that alerts the driver when the oil needs changing. Depending on driving conditions, these can extend change intervals to 10,000 or 15,000 miles."

Steve Ritter, senior editor of Chemical & Engineering News, writes, "Conventional wisdom has held that the oil should be changed about every 3,000 miles. This notion has been ingrained into people's heads for decades, in part as a marketing ploy by oil companies. The 3,000-mile interval made sense when engines used single-grade nondetergent oils. But with the latest oils and car designs, it's no longer necessary to change oil that often under normal driving conditions."

Concerned about the effects of used oil on the environment and responding to research thatindicates 73 percent of California drivers change motor oil more often than their vehicle's manufacturer recommends, the California Environmental Protection Agency and its Integrated Waste Management Board (CIWMB) have emerged as another strong opponent of the 3,000-mile oil change. The group recently launched a public information program and website (www.3000milemyth.org) designed to "bust the 3,000-mile myth" and encourage drivers to reduce used oil volume by following the longer oil drain recommendations of vehicle manufacturers.

"Used motor oil poses a great risk to the environment," said CIWMB Chair Margo Reid Brown. "With better made cars and the rise of synthetic oils, the 3,000-mile standard is not always recommended."

Most recently, General Motors announced its support of the CIWMB program to educate drivers about oil change intervals. According to GM, standard 3,000- mile oil change recommendations are based on outdated engine and oil technology, and the company instead recommends changing oil based on its Oil Life System. Currently included on over 97 percent of all GM vehicles sold in the U.S., the GM Oil Life System typically allows drivers to extend drain intervals up to 10,000 miles through use of a computer-based software algorhythm that measures vehicle operating conditions. With 31 million vehicles on the road equipped with the Oil Life System, GM spokesman Tom Henderson claims following its recommendations rather than the 3,000-mile rule could save 100 million gallons of oil annually.

In addition to the environmental benefits associated with less waste oil, extended drain intervals save consumers money. For example, customers who purchase conventional oil at $3 or more per quart, drive 12,000 miles per year and follow 3,000-mile oil change recommendations spend atleast $60 per year on oil alone (assuming a five-quart sump capacity). AMSOIL Dealers and AMSOIL Preferred Customers who pay $6.45 per quart (based on case pricing) under the same conditions pay only $32.25 per year.

"When it comes to oil changes, less is more," claims the CIWMB. "You'll have more money in your wallet by changing your oil less, and fewer oil changes mean less oil that needs to be safely managed and recycled."

Premium AMSOIL synthetic motor oils offer the longest drain intervals on the market, unsurpassed protection and performance that effectively extends equipment life and improved fuel economy, saving customers money at the pump and reducing the nation's dependence on foreign oil.