GM* recently launched a new motor oil performance standard with its proprietary dexos R* motor oil specification.

 GM* recently launched a new motor oil performance standard with its proprietary dexos R* motor oil specification.

Testing is complete and AMSOIL Signature Series already outperforms the dexos R specification. 

Read More:

https://blog.amsoil.com/gm-dexos-r-raises-the-motor-oil-bar-for-high-performance-engines/?zo=278060

General Motors new Dexos R Motoroil Specification

#dexosr #gmdexos, #amsoil #amsoilsynthetics #amsoilwebsite #amsoilstore

http://www.upmpg.com/

The Need To Do Regular Oil Changes

Why Do I Need To Change My Oil?

Dan McClellandDan McClelland | Jan 07, 2020 8:36 AM




Regardless of its quality, every motor oil eventually loses its potency and must be changed to ensure peak engine protection. Let’s take a look at what happens to motor oil over time and why you periodically need to change oil.

Losing the base

Base oils are the backbone of the finished lubricant that ends up in your engine. Over time, they lose effectiveness due to the following factors:

Oxidation

The interaction between oxygen molecules and motor oil molecules naturally leads to chemical breakdown.

Just as oxygen causes a cut apple to brown or exposed metal to rust, it breaks down base oils and reduces motor oil’s effectiveness.

Oxidation can lead to increased oil viscosity, which negatively affects energy efficiency. It also causes the formation of harmful deposits and sludge.

High heat

Today’s engines run hotter than ever before, with temperatures up to 235°F (113ºC), and even higher if towing or hauling.

The rate of oxidation for oil doubles for every 18°F (10°C) increase in temperature.

Moisture

Your vehicle is subjected to temperature swings, even when it is parked in the garage.

Those temperature swings cause condensation to form inside your engine, leading to water contamination.

Leaving a vehicle parked for extended periods or taking short trips that don’t allow the engine to fully warm up allow water to remain in the oil rather than evaporating and exiting through the tailpipe. Water can lead to formation of sludge…yet another reason why you must change oil.

Viscosity is a motor oil’s most important property. The lower the viscosity, the faster the oils flows, like water. Thicker oils flow more slowly, like honey.

Viscosity loss

A lubricant’s viscosity is its most important property.

Viscosity has a direct bearing on wear protection, and your engine is designed to operate best using a motor oil of a specific viscosity (e.g. 5W-30).

The intense pressure the oil bears as it’s squeezed between moving parts, like the piston ring/cylinder wall interface, can tear apart, or shear, its molecular structure, leading to viscosity loss.

Suddenly, the 5W-30 motor oil your engine was designed to use is now essentially a 5W-20 oil, and wear protection may be compromised. When this happens, it’s time to change your oil.

Shop AMSOIL Synthetic Motor Oil

Fuel dilution

Fuel can wash past the piston rings and contaminate the motor oil, causing it to lose viscosity.

Frequent short trips that don’t allow the oil to reach normal operating temperature can be especially problematic because the fuel won’t volatilize and exit through the PCV system.

Excessive fuel dilution leads to sludge and varnish, requiring you to change oil more frequently.

Additives: designed to deplete

Additives are added to base oils to reduce destructive processes and enhance beneficial properties.

For example, antioxidant additives help slow the rate of oxidation. Detergency additives help prevent deposits and sludge while cleaning pre-existing deposits. Formulators add anti-wear additives to some lubricants to form a sacrificial barrier on metal components and help prevent wear.

Since they’re sacrificial in nature, additive depletion is one of the primary reasons motor oil loses its effectiveness and must be changed. 

While AMSOIL synthetic motor oil gives you the convenience of fitting oil changes into your schedule, it remains vital to install fresh oil at the appropriate time.  

Shop AMSOIL Synthetic Motor Oil

Motor Oil Viscosity Explained

Lubrication Technology Explained

 LUBRICATION 101: A LOOK AT BASIC LUBRICATION CONCEPTS

Lubrication can be a daunting subject for someone unfamiliar with its basic concepts. Even someone with experience in the field can be confused by the multitude of lubricants available on the market today. Reviewing a few basic lubrication principles can make it easier to understand why proper lubrication is necessary in every application.

FRICTION

Webster defines friction as the “rubbing of one body against another,” and as “resistance to relative motion between two bodies in contact.” Friction can be beneficial. It generates heat that can be used to start a fire, and it is the principle behind a vehicle’s braking system.

Friction can also be detrimental. The heat generated as the result of friction can cause damage to an engine. Because contact is required to generate friction, wear can take place in these areas of contact, leading to material failures, overheating and the formation of deposits. Although there are many ways to reduce friction, the most common way is through the use of a fluid or semifluid lubricant. The key characteristic of lubricants is that they are not readily compressible, minimizing component contact or eliminating contact altogether.

TYPES OF LUBRICATION

There are three types of lubrication conditions that can exist between two surfaces:
Hydrodynamic or Full-Film Lubrication is the condition in which surfaces are completely separated by a continuous film of lubricating fluid. The non-compressible nature of this film separates the surfaces and prevents metal-to-metal contact. The lubricant’s viscosity assumes responsibility for the majority of wear protection; additives play a limited role. Although full-film lubrication does not generally allow metal-to-metal contact, abrasive wear or scratching can still occur if dirt particles penetrate the lubricating film.

HYDRODYNAMIC LUBRICATION

SURFACES SEPARATED BY BULK LUBRICANT FILM

Engine components operating under a full-film lubrication regime include the crankshaft, camshaft and connecting rod bearings, and piston pin bushings. Under normal loads, transmission and rear-axle bearings also operate under a full-film regime.

Elasto-Hydrodynamic Lubrication exists when a sudden reduction of the oil film causes a temporary increase in viscosity. When viscosity increases, the film can become rigid, creating a temporary elastic deformation of the surfaces. The lubricant’s viscosity and additives work together to protect surfaces in an elasto-hydrodynamic regime.

The shear strength of the fluid increases due to an increase in load or pressure of a surface and behaves as though it were stronger than the metal surface it acts against, thus causing the surface to deform.

 

Anti-wear additives are often relied upon to protect engine bearings in high-load conditions, while both anti-wear and extreme-pressure additives work to protect gears in high-load conditions.

BOUNDARY LUBRICATION

PERFORMANCE ESSENTIALLY DEPENDENT ON BOUNDARY FILM

Boundary Lubrication is a condition in which the lubricant film becomes too thin to provide total surface separation. This may be due to excessive loading, low speeds or a change in the fluid’s characteristics. In such cases, occasional metal-to-metal contact takes place between surfaces, and the surfaces are almost entirely dependent on the lubricant’s additives to provide protection.

Anti-wear additives protect the cam lobes, cylinder walls and piston rings in engine high-load conditions, while antiwear and extreme-pressure additives protect ring and pinion gears in rear axles.

OTHER LUBRICANT FUNCTIONS

Though minimizing friction and wear is the primary function of a lubricant, it is also required to perform the following tasks:

Clean - A lubricant must maintain internal cleanliness by suspending contaminants or keeping contaminants from adhering to components.

Cool Moving Elements - Reducing friction minimizes the amount of heat generated and lowers the operating temperature of the components. A lubricant must also absorb heat from the components and transport it to a location where it can be safely dissipated.

Prevent Contamination - The lubricant must act as a dynamic seal in locations such as the piston, piston ring and cylinder contact areas. This minimizes contamination by combustion byproducts, for example, in the lubricating system. Lubricants are also relied upon to support mechanical seals found elsewhere and to minimize external contamination and fluid loss.

Dampen Shock - The lubricant may be required to cushion the blows of mechanical shock. A lubricant film can absorb and disperse these energy spikes over a broader contact area.

Transfer Energy - A lubricant may be required to act as an energy transfer medium as in the case of hydraulic equipment or lifters in an automotive engine.

Prevent Corrosion - A lubricant must have the ability to prevent or minimize internal component corrosion. This can be accomplished either by chemically neutralizing the corrosive products or by setting up a barrier between the components and the corrosive material.

COMPONENTS OF A LUBRICANT

Lubricants are generally composed of two groups of materials. Base oils comprise 75 to 95 percent of the finished product. The most commonly used base oils are derived from petroleum crude oil. Additives are usually added to the base oils to enhance or impart new properties. The use of such special chemical compounds is another way to minimize friction and wear, and they can offer protection when the lubricating fluid cannot maintain component separation.

INCREASED DEMAND ON LUBRICANTS

As time goes on, the lubrication needs of equipment continue to change. As equipment becomes more advanced and sophisticated, the demands placed upon the required lubricants become more severe. What may have been a preferred lubricant in the past is likely to be totally unacceptable today.

The automotive industry is an excellent example of how demands on equipment have changed. The engines used in today’s vehicles require significantly more from a motor oil than they did in the past.

Modern vehicles are requiring lighter viscosity oils for improved fuel economy, but feature engines that output more power per cubic inch of displacement than ever before. To achieve this power level, vehicle manufacturers are adding turbochargers that expose motor oils to higher temperatures and greater stress. Meanwhile, requirements for cleaner exhaust emissions have contributed to higher levels of contaminants in the oil and increased the oil’s operating temperature. By reducing aerodynamic drag, manufacturers have also minimized the amount of air that flows over engines and drivetrains, causing operating temperatures to trend further upward. Even with all these changes, manufacturers are requiring lubricants to last longer than they ever did before.

HOW ARE SYNTHETIC OILS DIFFERENT?

Although the engineering of synthetic base oils varies, synthetics are generally made through a reaction process that significantly improves the consistency of the base oil and its molecular uniformity. Conventional petroleum base oils, on the other hand, are obtained through a process of distillation.

Distillation slightly limits the molecular diversity that may exist within the base oil, but does not completely eliminate nonessential molecular structures. This is important because unnecessary molecular structures produce variations in the base oil’s performance. The ideal lubricant’s chemical composition is one in which the molecular construction is identical throughout, such as in a synthetic base oil. Because of the way synthetic base oils are produced, they are molecularly uniform and contain significantly less undesirable materials than a conventional base oil. 

Molecular uniformity also affects the properties that each type of lubricant possesses. The properties of conventional oils tend to vary due to inconsistencies in the crude oil from which they are obtained. The properties and performance features of synthetics, on the other hand, are predictable due to their molecular uniformity. 

AMSOIL synthetic lubricants are formulated to take advantage of the superior properties of premium synthetic base oils and top-of-the-line additives. They provide excellent lubrication and wear protection and have been designed to resist the chemical breakdown processes that limit the service life of conventional petroleum oils. 

 

 

Quality filtration is equally as important as quality lubrication.

Mark Nyholm-  Technical Product Manager

Filters are often overlooked, but they are integral to keeping oil clean and performing at its best.

It’s often said that motor oil is the lifeblood of the engine. We depend on it to prevent wear, maintain cleanliness, minimize operating temperature and act as a seal. Should the oil become contaminated, its ability to perform these tasks can be greatly impaired. Dirty oil can cause piston ring wear, leading to increased oil consumption, and it can also accelerate wear in bearings and cylinders. Engine contaminants cannot be eliminated, but they can be controlled with proper filtration. Proper filtration helps keep oil clean and flowing freely, ensuring the lubricant will be able to perform its necessary tasks continuously.

At a basic level, all filters are designed to separate solid particles from air or fluid and keep them from entering into places where they are not wanted. Think about your morning coffee and what would happen if the coffee filter failed to keep the coffee grounds out of the brewed beverage. You would have very thick and sludgy coffee, not unlike the sludge that can build up in engines with severely contaminated motor oil. In the same way as coffee filters keep grounds out of your java, oil filters capture contaminant particles within the oil to prevent them from causing engine wear. This is important because contaminated oil can reduce engine life from 60 to 80 percent. You probably can see how a poorly designed filter could lead to an engine filled with gunk.

When discussing filters and filter performance at your next barbeque, make sure you talk about the four main criteria: flow, efficiency, capacity and particle size. Proper flow is important so oil can get to critical parts of the engine. If the filter creates an abnormal restriction of oil flow, it can lead to oil starvation and catastrophic engine damage. Efficiency is a measure of a filter’s ability to adequately remove contaminants of a particular size that may critically harm the application. The greater the efficiency, the better that filter is at removing contaminant particles. Capacity describes the amount of contaminants a filter can hold and still flow oil properly. Capacity is described as the service interval or useful life of the filter.

Most of these particles are smaller than what is visible with the human eye. Particles of greatest concern for most applications are 5-25 microns, which is smaller than the diameter of a human hair. Generally, if a filter has large openings, like a window screen, it will have poor efficiency but will flow very well. As screen holes get smaller, more small particles will get caught in the screen. The trade-off is that flow will be restricted. Balancing these two design features is an essential part of filter design.

The type of filter media used in a filter has a big impact on performance. Four major types exist in today’s marketplace, including open-celled foam, cellulose, cellulose/synthetic composite and full synthetic. Synthetic filter media has several advantages over the other filter media materials. Synthetic media has higher capacity and can be modified to a wide range of efficiencies. Synthetic media also removes smaller contaminant particle sizes, and is suitable for extended service intervals because of the increased capacity for contaminants. It is also typically more durable than other filter media, like paper-based materials that use sticky resins to keep fibers from falling apart over time. Cellulose media used in lower-quality filters have larger fibers and bigger holes that let more contaminants pass through the filter. Synthetic filter media is chemically manufactured rather than derived from a tree, like paper, so the fibers are much smaller and specifically designed to capture smaller particles while still keeping good flow of oil through your engine. Ah, the magic of synthetic materials.

AMSOIL incorporates synthetic media into AMSOIL Ea® Filters, which rank among the highest-efficiency filters available. Better filtration equals reduced engine wear. In addition, the extra capacity to hold more contaminants means they keep filtering over extended intervals. When used in conjunction with AMSOIL synthetic motor oil, AMSOIL Ea Oil Filters designated with product code EaO are guaranteed for 25,000 miles/ one year (15,000 miles/one year in severe service). Smaller Ea Oil Filters designated with product code Ea15K are guaranteed for 15,000 miles/one year in normal and severe service. Good oil and good filtration go hand in hand, and AMSOIL Dealers have the products to offer the best of both to their customers.

Keeping Engines Clean with AMSOIL

Though conventional motor oil quality has improved over the past 30 years, this progress is also offset by emission-reduction strategies, including variable valve timing (VVT), which strangles the engine a little tighter and makes it run hotter.

The average motorist has never even heard of variable valve timing, but it’s a critical component in the operation of a vehicle. Almost every vehicle manufacturer has published a bulletin stating that the number one cause of variable-valve-timing system problems is small amounts of residue and sludge. In other words, cleanliness is absolutely essential.

In the old days, the engine’s intake and exhaust valves were set to open and shut at specific points in the four-stroke cycle for a set amount of time. With variable valve timing, engines can adjust the timing for when and how long these valves open and shut by relying on a combination of sensors and mechanical systems, many critically located on the camshaft and crankshaft. When these components get gummed-up with sludge or deposits, it can lead to poor performance and costly repair bills.

Because AMSOIL synthetic motor oil resists oxidation and breakdown in high heat, it is less prone to produce the varnish and sludge that damages these critical sensors.

Keeping engines clean by using AMSOIL synthetic motor oils helps them last longer. Cleanliness reduces wear, ring sticking and emissions while helping ensure all these components operate as designed.

More information  on AMSOIL Synthetic Motor Oil

Solving the Challenges of Flat-Tappet Cams in Classic Car Engines

Summer belongs to classic cars and hot rods. It's the season when thousands visit car shows across North America and loyalists of every make and model cruise the streets to show off their rides. One of the big concerns among classic car owners in recent years, however, has been the abundance of flat-tappet camshaft failures that many attribute to the reduction of zinc and phosphorus in today's oil formulations.

Zinc dialkyldithiophosphate (ZDDP) is the most common zinc-based additive, and is used primarily as an anti-wear agent to prevent premature engine wear. It also provides corrosion and oxidation protection. However, because the zinc and phosphorus found in ZDDP can negatively affect catalytic converters, it has been phased out of motor oil formulations in recent years.
Reducing ZDDP content has drawbacks, as classic car owners have found. Older vehicles with flat tappet camshafts and, in particular, engines that include high-tension valve springs or other modifications that create high contact pressures can suffer premature wear due to reduced ZDDP levels.

Flat-Tappet vs. Roller Cams

The design of flat tappet cams makes them especially vulnerable to wear. As the name indicates, the tappet - or lifter - is flat. During operation, the surface of the cam lobe slides rapidly over the surface of the tappet, producing high friction and temperatures. A thin oil film is the only barrier that prevents the lifter and cam lobe from welding together. If the oil film fails or provides insufficient wear protection, the two components can eventually wear the flat tappet cam and affect valve operation. Engine power and efficiency can decline if the flat tappet cam cannot lift the valves enough to adequately charge the chamber for ignition or release exhaust fumes. Because most V8 engines of the muscle-car era came standard with flat tappet cams, the problem is especially prevalent to classic-car and hot-rod owners.
Roller cams, on the other hand, are differentiated by rolling contact rather than sliding contact. Although more costly, roller cams are common in most modern vehicles and can be retrofitted into classic-car and hot-rod engines.

Click for larger image

Demand for High-Zinc Oils

The abundance of flat tappet camshaft failures in classic-car and hot-rod circles has spurred the market for high zinc motor oils formulated especially to protect flat tappet cams AMSOIL Z-ROD® 20W-50 Synthetic Motor Oil (ZRT) and AMSOIL Z-ROD® 10W-30 Synthetic Motor Oil (ZRF) are specially engineered for these classic and high-performance vehicles. It features a high-zinc formulation to help prevent wear on flat tappet cams and other critical engine components. Because many of these vehicles sit idle much of the time, Z-ROD contains a proprietary blend of rust and corrosion inhibitors for added protection during longterm storage. Z-ROD Synthetic Motor Oil is designed to perform on the street and protect during storage.

Complete Vehicle Protection

Classic cars and hot rods need more than just premium engine protection. Many are modified to deliver increased power and torque, placing added stress on the transmission, differential and chassis. AMSOIL Synthetic Manual Transmission & Transaxle Gear Lube (MTG), Severe Gear® Synthetic Gear Lube (SVG, SVT, SVO & Dominator® Synthetic Racing Grease (GRG) offer advanced protection modified classic cars and hot rods need. These and other products are featured in the new Classic Cars Brochure (G3113).

Purchase AMSOIL products at up to 25% discounted as an AMSOIL Preferred Customer.

AMSOIL Signature Series Synthetic Motor Oil Outperforms Competition in New Study

Nine synthetic motor oils were compared to AMSOIL Signature Series 5W-30 Synthetic Motor Oil (ASL). When it was all said and done, Signature Series demonstrated the best overall performance and cost-effectiveness.

Click for larger image

Since AMSOIL introduced the first synthetic motor oil to meet American Petroleum Institute (API) service requirements in 1972, many other synthetic motor oil brands have been introduced. Today, synthetics are widely viewed as superior to conventional motor oils, and demand continues growing, but how do other brands compare to AMSOIL?

A Study of SAE 5W-30 Synthetic Motor Oils

Signature Series 5W-30 Synthetic Motor Oil and nine other synthetic oils were subjected to five industry tests conducted according to American Society of Testing and Materials (ASTM) methodology. The overall annual cost of each oil was also compared. The study included synthetic motor oils exclusively for a number of reasons. First, most motorists now understand that synthetics provide increased performance benefits compared to conventional oils, so convincing consumers of synthetics' superiority is less of an issue. Second, while conventional motor oil sales remain flat, demand for synthetics continues to increase. Third, testing only synthetics facilitates an apples to apples comparison.

Methodology

Testing examined several important areas of motor oil performance, including resistance to deposit formation, wear protection, high-temperature stability, resistance to acid formation and cold temperature performance.

Click for larger image Four-Ball Wear Test results indicate significant differences in relative wear protection between oils. The top four performers limited wear scars to under 0.40 mm. AMSOIL Signature Series Synthetic Motor Oil demonstrated the best wear protection in the Four-Ball Wear Test. Click for larger image  AMSOIL Signature Series Synthetic Motor Oil tested two numbers higher than the nearest competitor.

Each oil was subjected to the following ASTM test methodologies:

• Thermo-Oxidation Engine Oil Simulation Test (TEOST, ASTM D 6335)
• NOACK Volatility Test (ASTM D 5800)
• Four-Ball Wear Test (ASTM D 4172 Mod.)
• Total Base Number (ASTM D 2896)
• Cold Cranking Viscosity (ASTM D 5293)

Test results published in A Study of SAE 5W-30 Synthetic Motor Oils describe and represent properties of oils that were acquired from November 2012 to December 2012. Results do not apply to any subsequent reformulations of such oils or to new oils introduced after completion of testing. All oils were available to consumers at the time of purchase. An independent, third-party lab conducted all tests. Formulations were coded to reduce the potential for bias, and samples were tested in random order. An appropriate number of trials of each oil were run to produce results at the 95 percent confidence level when compared to Signature Series Synthetic Motor Oil. The 95 percent confidence level only applies when comparing AMSOIL Signature Series Synthetic Motor Oil to the other 5W-30 oils. The 95 percent confidence level does not apply when comparing the other oils to one another.

Candidate Oils

The following nine oils were selected for the study:

• Castrol Edge® with Titanium Fluid Strength Technology®
• Lucas Synthetic
• Mobil 1™ Extended Performance
• Pennzoil Ultra™
• Petro-Canada SUPREME Synthetic™
• Quaker State Ultimate Durability™
• Red Line High Performance Motor Oil
• Royal Purple High Performance Motor Oil
• Valvoline SynPower® Full Synthetic Motor Oil

All oils are 5W-30 viscosity and recommended for applications requiring API SN/ILSAC GF-5 specifications.

Results

AMSOIL Signature Series Synthetic Motor Oil displayed the best results in the Four-Ball Wear, Total Base Number and Cold Crank Viscosity Tests. Results in the NOACK and TEOST Tests were also impressive, proving Signature Series Synthetic Motor Oil's excellent high-temperature performance. Other oils performed well in some tests, but not as well in others, illustrating the challenge inherent in formulating a high-quality motor oil that performs well in tests designed to assess optimum engine protection and life. In addition to delivering outstanding performance, Signature Series Synthetic Motor Oil provides maximum cost-effectiveness - even at retail pricing. Because they buy at wholesale, Dealers and Preferred Customers receive even more value. In the end, no other oil demonstrated itself capable of providing the overall performance in these tests and cost effectiveness of Signature Series.

Click for larger image

Although synthetic motor oils are known to provide increased low temperature performance compared to conventional oils, results suggest performance differences between formulations. AMSOIL Signature Series Synthetic Motor Oil demonstrated the lowest cold crank viscosity (3,727 cP).

Click for larger image

 Results demonstrate a range of performance differences. Only Castrol Edge with Titanium Fluid Strength Technology and AMSOIL Signature Series Synthetic Motor Oil limited total deposit weight to 5 mg or less.

AMSOIL 5W-30 Signature Series Synthetic Motor Oil

Oil Additives Can Offset the Careful Balance of a Well-Formulated Motor Oil

An overabundance of anti-wear agents, for example, can lead to reduced resistance to corrosion.

Dan Peterson - Vice President Technical Development AMSOIL Inc.

I don't get up on my soapbox very often – partly because I have put on a few extra pounds and don't want to break the box, and partly because it's just not my personality. Not a lot of things really get to me, but when I come across something that does, you don't want to be with me in the car for a long drive. One of these things is engine oil additives. The last time I stopped by the local parts store to pick up a tool for a brake job on my Ford Fusion, I stood in the aisle for a full 10 minutes looking at the huge display of engine oil additives. I was not in a hurry, so I picked up a dozen or so and read the marketing claims.

Wow; it seems almost any internal engine problem in the world can be solved simply by using an engine oil additive. "Restores engine life, eliminates dry starts, eliminates engine noise, restores parts' surfaces AND compensates current wear!" Now I see why people buy all these oil additives. Too busy or just not interested in taking care of your vehicle? Just wait until you have a problem and then buy a solution at the local parts store and you are back in business. Our instant-gratification culture pushes us into believing in quick solutions. In reality, there are very few quick solutions that can correct years of neglect in any area of life, including your internal combustion engine. Very few, if any, engine oil additives solve engine issues overnight or somehow restore engines to their original condition. So how do you get the longest, trouble-free life out of your engine? Use a highquality, trusted brand of synthetic motor oil regularly and don't add any engine oil additives. Formulating a motor oil to perform all the critical jobs required by your engine is a balancing act. You can't just focus on improving one property without testing and evaluating the impact on all critical oil properties. Many times, use of additives improves one property, but causes other properties to take a nosedive. 

Formulating synthetic motor oils is a core strength developed over the past 40 years at AMSOIL, and it is not an easy task. Motor oils need to protect engines against abnormal wear, excessive varnish, sludge, rust and corrosion and damaging foam. Motor oils also need to remove heat, help meet fuel economy standards, keep engine seals from leaking and keep catalytic converters working effectively over their projected lives.

Many negative outcomes derived from using engine oil additives have been documented over the years, including accelerated corrosion, excess oil thickening in cold temperatures and increased deposit formation. Most of these negative outcomes are relatively complicated chemical interactions, but just like your family is interconnected, so is the chemistry in your motor oil. When you add Uncle Buck to your family for a week, you and the kids all have a lot more fun staying up late and listening to stories, but he upsets the family balance. The kids have black circles under their eyes from staying up too late, you argue with your spouse about a few choice new words the kids picked up and you have to clean up cigar butts all over the garage when he finally leaves. Seems fun at first, but a week-long visit proves having Uncle Buck live with you for good isn't such a good idea.

The chemicals in motor oils are all interconnected and work together like a family unit to provide all the important properties required to keep your engine operating well. Most motor oils are designed with a measured amount of wear protection and deposit control. The problem comes when you add a whole bunch of extra or new wear protection or deposit control, and it ends up creating corrosion or destroying coldtemperature properties. Motor oils that perform well have some Uncle Buck built in, but at an appropriate level that does not upset critical chemistry in other areas designed to keep your engine running smoothly over the long run.

If you want a more detailed explanation by industry experts, a recent Noria announcement outlined that "Aftermarket oil additives can backfire." In the book, "Practical Handbook of Machinery Lubrication," the following description is listed:

"Increasing the percentage of a certain additive may improve one property of an oil while at the same time degrade another. When the specified concentrations of additives become unbalanced, overall oil quality can be affected. Some additives compete with each other for the same space on a metal surface. If a high concentration of an anti-wear agent is added to the oil, the corrosion inhibitor may become less effective. The result may be an increase in corrosion-related problems."

It's a much fancier way of saying too much of your Uncle Buck is not good for your marriage. Next time you talk to someone who is contemplating using one of those flashy new engine oil additives, tell them about the importance of maintaining the critical balance in motor oil and what can happen when it becomes unbalanced. 

AMSOIL Synthetic Motor Oils 

3,000-Mile Oil Change Comes Under Fire

The standard 3,000-mile oil change interval is under attack. Promoted for years by most motor oil companies and quick lube businesses as an essential part of proper vehicle maintenance, the public has become much more skeptical in recent years. In fact, searches for "3,000 mile oil change" in top Internet search engines such as Google and Yahoo! primarily yield articles and blog postings that challenge the practice and refer to it as a "scam" or "myth."

AMSOIL synthetic motor oil was introduced in 1972 as the only motor oil on the market recommended for 25,000-mile/one year drain intervals, and the company has spent much of the last 36 years as the lone voice promoting the benefits of extended drain intervals. However, AMSOIL has recently welcomed an increasing number of companies and organizations to the party. Although they still don't recommend drain intervals as long as AMSOIL recommendations, the momentum is growing.

Vehicle manufacturers have mostly recommended oil change intervals exceeding 3,000 miles in recent years. In fact, most recommend intervals of 5,000 miles or more. Ford Motor Company recommends drain intervals of 7,500 miles in its model year 2007 and newer vehicles, while other manufacturers incorporate oil monitoring systems in their newer vehicles that allow motorists to extend drain intervals even further.

In its December 2006 issue, Consumer Reports encourages drivers to follow the longer oil change recommendations of vehicle manufacturers, saying, "Although oil companies and quick-lube shops like to promote this idea [that engine oil should be changed every 3,000 miles], it's usually not necessary. Go by the recommended oil-change schedule in your vehicle's owner's manual. Most vehicles driven under normal conditions can go 7,500 miles or more between oil changes. Some models now come with a monitoring system that alerts the driver when the oil needs changing. Depending on driving conditions, these can extend change intervals to 10,000 or 15,000 miles."

Steve Ritter, senior editor of Chemical & Engineering News, writes, "Conventional wisdom has held that the oil should be changed about every 3,000 miles. This notion has been ingrained into people's heads for decades, in part as a marketing ploy by oil companies. The 3,000-mile interval made sense when engines used single-grade nondetergent oils. But with the latest oils and car designs, it's no longer necessary to change oil that often under normal driving conditions."

Concerned about the effects of used oil on the environment and responding to research thatindicates 73 percent of California drivers change motor oil more often than their vehicle's manufacturer recommends, the California Environmental Protection Agency and its Integrated Waste Management Board (CIWMB) have emerged as another strong opponent of the 3,000-mile oil change. The group recently launched a public information program and website (www.3000milemyth.org) designed to "bust the 3,000-mile myth" and encourage drivers to reduce used oil volume by following the longer oil drain recommendations of vehicle manufacturers.

"Used motor oil poses a great risk to the environment," said CIWMB Chair Margo Reid Brown. "With better made cars and the rise of synthetic oils, the 3,000-mile standard is not always recommended."

Most recently, General Motors announced its support of the CIWMB program to educate drivers about oil change intervals. According to GM, standard 3,000- mile oil change recommendations are based on outdated engine and oil technology, and the company instead recommends changing oil based on its Oil Life System. Currently included on over 97 percent of all GM vehicles sold in the U.S., the GM Oil Life System typically allows drivers to extend drain intervals up to 10,000 miles through use of a computer-based software algorhythm that measures vehicle operating conditions. With 31 million vehicles on the road equipped with the Oil Life System, GM spokesman Tom Henderson claims following its recommendations rather than the 3,000-mile rule could save 100 million gallons of oil annually.

In addition to the environmental benefits associated with less waste oil, extended drain intervals save consumers money. For example, customers who purchase conventional oil at $3 or more per quart, drive 12,000 miles per year and follow 3,000-mile oil change recommendations spend atleast $60 per year on oil alone (assuming a five-quart sump capacity). AMSOIL Dealers and AMSOIL Preferred Customers who pay $6.45 per quart (based on case pricing) under the same conditions pay only $32.25 per year.

"When it comes to oil changes, less is more," claims the CIWMB. "You'll have more money in your wallet by changing your oil less, and fewer oil changes mean less oil that needs to be safely managed and recycled."

Premium AMSOIL synthetic motor oils offer the longest drain intervals on the market, unsurpassed protection and performance that effectively extends equipment life and improved fuel economy, saving customers money at the pump and reducing the nation's dependence on foreign oil.