What is the best synthetic motoroil?
AMSOIL provided proof of superior performance for it's Signature Series Synthetic Motor Oil.
Click photo for more information.
 |
| AMSOIL Signature Series has the proof of superiority. |
Saturday, February 22, 2020
Tips To Make Your Car Last Longer
Maintenance Tips to Make Your Car Last Longer
 |
| Washing your car can go a long way to keeping it from rust and corrosion. For good information on keeping your car in new and reliable condition, read this article: How to make your car last longer |
Saturday, January 25, 2020
Automatic Transmissions and How They Work
How Does an Automatic Transmission Work?
Great easy to understand article and informative video:
How does an automatic transmission work?
CLICK HERE
Motor Oil for Cold Weather
What Motor Oil is Best for Winter? (And Other Cold-Weather Questions)
Did you know that most wear occurs on cold engine start up before thick or frozen motor oil has had a chance to circulate? Synthetic motor oils are much more fluid in cold for immediate lubrication even when starting an engine in extreme cold.
Check out this great information on motor oils and cold weather.
Synthetic Motor Oil and Cold Weather
Friday, January 17, 2020
Motor Oil Color and Service Life
What Your Motor Oil Color Means
An object’s color can reveal a lot about its condition. A brown apple? Probably not great to eat. A slice of green bread? Same. What about motor oil color? Can your eyes provide insight into your oil’s suitability to protect your engine?
Does motor oil that’s turned black require changing?
Not necessarily. In this case, the oil’s color is a sign it’s doing its job.Oil naturally darkens during use for a couple reasons, including heat cycles. During your drive to work, your engine reaches normal operating temperature (typically 195ºF–220ºF [90ºC–104ºC]), heating the motor oil.
Then the oil cools while your car sits in the parking lot. The process repeats as you run errands over lunch and when you return home.
This continual daily exposure to increased heat naturally darkens the oil.
In addition, normal oxidation can darken oil.Oxidation occurs when oxygen molecules interact with oil molecules and cause chemical breakdown, just like how oxygen causes a cut apple to brown or iron to rust.
Soot also causes oil to turn black.
While we associate soot with diesels, today’s direct-injected gasoline engines can produce more soot than older diesels without exhaust-treatment devices. While individual soot particles are too small to cause engine wear, particles can agglomerate into larger wear-causing contaminants that can lead to wear before they lodge in the oil filter.
Just because the oil has darkened doesn’t necessarily mean it’s reached the end of its service life.
Motor oil contains detergent and dispersant additives designed to clean contaminants like soot and prevent them from depositing onto metal surfaces.Oil that has turned black is an indication the additives are doing their job. You can read more about that here.
What about motor oil that looks like chocolate milk?
In this case, motor oil color does reflect performance…and oil that looks like chocolate milk is bad. Very bad.Water or engine coolant have contaminated the oil, typically due to a head gasket leak.
We all know that water and oil don’t mix. When they combine in your engine, water droplets suspend in the oil and alter its appearance until it looks frothy or like chocolate milk.The presence of water leads to foam bubbles, which rupture when pulled between engine parts during operation, leaving metal components unprotected against wear.
It also forms sludge, which can clog oil passages and ruin the engine. In this case, see a mechanic as soon as possible.
What if my oil looks or feels thin?
While not related to motor oil color, this is another frequent question we field from motorists.Don’t take this the wrong way, but in this case go out to the garage and smell your dipstick.
Oil that has lost viscosity is often due to fuel dilution. You can usually smell gasoline or diesel fuel on the dipstick in such cases.
Fuel dilution occurs when gas or diesel wash past the piston rings and contaminate the oil in the sump. It reduces oil viscosity, which reduces the oil’s ability to prevent wear. It also leads to formation of harmful varnish and sludge.Fuel dilution can occur if you idle your engine excessively or due to a mechanical defect. It’s also common in some modern direct-injected engines.
It’s important to note that no one can precisely measure an oil’s viscosity simply by looking at it or rubbing a little between their fingers.
As Oil ANALYZERS INC. manager Allen Bender likes to ask, “When’s the last time you had your eyes calibrated?”Oil analysis in the only definitive way to determine the oil’s viscosity and whether it’s lost viscosity due to fuel dilution.
My oil feels gritty? Should I change it?
When checking oil level, some motorists like to rub oil between their fingers to check for particles.Grit or other contaminants can mean the oil has chemically broken down, but this is unlikely, especially with a top-shelf synthetic oil.
More likely, the oil filter has filled with contaminants and unfiltered oil is bypassing the filter and circulating through the engine.
The filter is designed with a bypass valve to ensure the engine receives oil even if the filter is full.While dirty oil is preferable to no oil, it’s not a long-term plan for success. In this case, change the oil and filter.
Trust oil analysis, not your eyes
While it’s possible to get a rough idea what’s going on inside your engine due to oil color, appearance or scent, you need to perform oil analysis to find out what’s really going on.By chemically analyzing a used-oil sample, a qualified lab can tell you if the oil contains excessive wear particles, water contamination, fuel dilution and more. Ultimately, the report will tell you if the oil is suitable for continued use or not.
It’s a cost-effective way to get the most out of your oil change…and your engine. Check out this post to see how to perform oil analysis.
The Need To Do Regular Oil Changes
Why Do I Need To Change My Oil?
Regardless of its quality, every motor oil eventually loses its potency and must be changed to ensure peak engine protection. Let’s take a look at what happens to motor oil over time and why you periodically need to change oil.
Losing the base
Base oils are the backbone of the finished lubricant that ends up in your engine. Over time, they lose effectiveness due to the following factors:Oxidation
The interaction between oxygen molecules and motor oil molecules naturally leads to chemical breakdown.Just as oxygen causes a cut apple to brown or exposed metal to rust, it breaks down base oils and reduces motor oil’s effectiveness.
Oxidation can lead to increased oil viscosity, which negatively affects energy efficiency. It also causes the formation of harmful deposits and sludge.
High heat
Today’s engines run hotter than ever before, with temperatures up to 235°F (113ºC), and even higher if towing or hauling.The rate of oxidation for oil doubles for every 18°F (10°C) increase in temperature.
Moisture
Your vehicle is subjected to temperature swings, even when it is parked in the garage.Those temperature swings cause condensation to form inside your engine, leading to water contamination.
Leaving a vehicle parked for extended periods or taking short trips that don’t allow the engine to fully warm up allow water to remain in the oil rather than evaporating and exiting through the tailpipe. Water can lead to formation of sludge…yet another reason why you must change oil.
Viscosity is a motor oil’s most important property. The lower the viscosity, the faster the oils flows, like water. Thicker oils flow more slowly, like honey.
Viscosity loss
A lubricant’s viscosity is its most important property.Viscosity has a direct bearing on wear protection, and your engine is designed to operate best using a motor oil of a specific viscosity (e.g. 5W-30).
The intense pressure the oil bears as it’s squeezed between moving parts, like the piston ring/cylinder wall interface, can tear apart, or shear, its molecular structure, leading to viscosity loss.
Suddenly, the 5W-30 motor oil your engine was designed to use is now essentially a 5W-20 oil, and wear protection may be compromised. When this happens, it’s time to change your oil.
Fuel dilution
Fuel can wash past the piston rings and contaminate the motor oil, causing it to lose viscosity.Frequent short trips that don’t allow the oil to reach normal operating temperature can be especially problematic because the fuel won’t volatilize and exit through the PCV system.
Excessive fuel dilution leads to sludge and varnish, requiring you to change oil more frequently.
Additives: designed to deplete
Additives are added to base oils to reduce destructive processes and enhance beneficial properties.For example, antioxidant additives help slow the rate of oxidation. Detergency additives help prevent deposits and sludge while cleaning pre-existing deposits. Formulators add anti-wear additives to some lubricants to form a sacrificial barrier on metal components and help prevent wear.
Since they’re sacrificial in nature, additive depletion is one of the primary reasons motor oil loses its effectiveness and must be changed.
While AMSOIL synthetic motor oil gives you the convenience of fitting oil changes into your schedule, it remains vital to install fresh oil at the appropriate time.Dual-Clutch Transmissions (DCT)
How Does a Dual-Clutch Transmission (DCT) Work?
A dual-clutch transmission (DCT) is synonymous with high performance. Compared to a traditional automatic transmission, it delivers…
- Faster, smoother shifts
- Increased fuel economy
- Improved performance
 |
| Although the DCT transmission dates to the 1930s, it made its first practical appearance decades later in several 1980s-era race cars.
In 2003, the Volkswagen Golf Mk4 R32 was the first production vehicle to feature the technology.
Today you can find a DCT in a variety of cars, from the relatively tame Hyundai Sonata to the brash, sexy Nissan GT-R.
How a DCT transmission works
DCTs are essentially two manual transmissions working in tandem.
One gear shaft contains the even-numbered gears, and the other contains the odd-numbered gears. While you’re accelerating in first gear, for example, the computer selects second gear on the other gear shaft. When it’s time to up-shift, the clutch that controls the even gears disengages and the clutch that controls the odd gears engages.
Compared to a traditional automatic transmission, gears shift much more quickly and smoothly in a DCT transmission – the perfect complement to a powerful, high-performance engine.
While DCTs are capable of seamless shifts, they can suffer from shudder or lurching at slow speeds.
Transmission fluid with specific frictional properties is required to prevent shudder. DCT fluid must also maintain the proper viscosity to provide protection during the high-heat operation native to high-performance sports sedans and supercars.
|
 |
| Buy AMSOIL DCT Fluid |
Protect the thrill
AMSOIL 100% Synthetic DCT Fluid is specifically engineered for sophisticated dual-clutch transmissions.
Its superior frictional properties protect against shudder and gear clashing to consistently produce fast, smooth shifts.
AMSOIL Synthetic DCT Fluid’s exceptional durability provides stability in stop-and-go traffic and excels under intense, high-heat conditions. Its built-in oxidation resistance helps prevent sludge formation in vital transmission parts.
Look up your vehicle
For more information on AMSOIL DCT Fluid click here.
For more information on AMSOIL Synthetic Lubricants click here.
Friday, October 11, 2019
New ILSAC GF-6A & GF-6B Motor Oil Specs For Modern Engines
ILSAC GF-6 and API SP specifications coming May 1.
AMSOIL is already ahead of the game.
Original equipment manufacturers (OEMs) are under pressure to improve fuel economy and reduce emissions. As a result, most new engines today use some combination of turbochargers, direct-fuel injection and variable valve timing to deliver better fuel economy and increase horsepower. The trend of lighter engine oils to achieve these goals continues with 0W-16 viscosities emerging in the market and 0W-12 and 0W-8 expected to follow. The industry has responded to these ultra-light viscosities with two new oil specifications: ILSAC GF-6 and API SP.
We Are Already There
Our claims about using advanced technology aren’t just talk, and this specification update proves it. AMSOIL synthetic motor oils already meet or exceed the new industry standards and require no change in formulation. This is not the first time we’ve been in this position. While the competition works on making major formulation adjustments, we just have to update our labels. The new specifications are not allowed to be displayed on labels until May 1, 2020. Expect to see updated AMSOIL labels then.
The Big Split
The International Lubricant Standardization and Approval Committee (ILSAC) recently set a new precedent in the passenger-car motor oil market by splitting its specification into two parts:
GF-6A – backward compatible, provides protection for a variety of older and newer engines.
GF-6B – not backward compatible, for use in select new vehicles.
Both versions focus on wear protection, prevention of lowspeed pre-ignition (LSPI) and improved engine cleanliness. However, GF-6B features a more stringent fuel economy test. Engine oils can easily be identified as ILSAC GF-6A or 6B by the API emblem on the front label of the packaging. A shield will represent the GF-6B specification, while the traditional starburst will indicate a GF-6A product. Both ILSAC specifications meet the industry-standard API SP specification which is most commonly found in owners’ manuals.
To learn more, visit amsoil.com/lspi
Saturday, July 13, 2019
What to do when a lawnmower won't start
Lawnmower Won’t Start? Do this.
A lawnmower that won’t start, especially when taken from storage, is almost always due to one problem: bad gas.Storing a lawnmower in the fall without adding gasoline stabilizer to the fuel tank can cause the fuel to break down and plug the fuel passages. If fixing that problem doesn’t help, there are a few other common maintenance practices to try, as we explain below.
Here’s what to do when your lawnmower won’t start
Replace the gas
Over time (like the six months your lawnmower sat in your garage over the winter), the lighter hydrocarbons in gas can evaporate. This process creates gums and varnish that dirty the carburetor, plug fuel passages and prevent gas from flowing into the combustion chamber.The carburetor bowl below formed corrosion and deposits during storage, which can easily plug fuel passages and prevent the engine from starting.
Ethanol-containing gas can absorb water from the atmosphere, which can lead to phase separation, which occurs when ethanol and gas separate, much like oil and water. Ethanol that has absorbed enough moisture and has sat long enough can foul the fuel system and prevent the engine from starting.
No matter how many times you yank the starter cord and pollute the air with your advanced vocabulary, the lawnmower won’t start if it isn’t getting gas.
In extreme cases, evaporation of lighter hydrocarbons can change the gasoline’s composition enough to prevent it from igniting. The gas may be fueling the engine, but it doesn’t matter if it won’t ignite.
If you neglected to add gasoline stabilizer to the fuel prior to storage, empty the tank and replace with fresh gas. If the tank is nearly empty, simply topping off with fresh gas is often enough to get it started.
On some mowers, you can easily remove and empty the fuel tank. Sometimes that’s more trouble than it’s worth. In these cases, use a fluid extraction pump or even a turkey baster.Clean the carburetor
You’ve replaced the fuel, but your lawnmower still won’t start.Next, try cleaning the carburetor. Remove the air filter and spray carburetor cleaner into the intake. Let it sit for several minutes to help loosen and dissolve varnish and gums.
On some carburetors, you can easily remove the float bowl. If equipped, first remove the small drain plug and drain the gas from the bowl. Remove the float bowl cover and spray the float and narrow fuel passages with carburetor cleaner.
This kind of “quick-and-dirty” carburetor cleaning is usually all it takes to get the gas flowing again and your lawnmower back to cutting grass.
If not, consider removing the carburetor from the engine, disassembling it and giving it a good cleaning. Be forewarned, however: taking apart a carburetor can lead to nothing but frustration for the uninitiated. Take pictures with your phone to aid in reassembly. Note the positions of any linkages or the settings of any mixture screws, if equipped.If you’re at all reluctant, visit the servicing dealer instead. Also consider replacing the carburetor altogether. It’s a fairly simple process on most smaller mowers and it’s often less expensive than taking it to the dealer.
Clean/replace the air filter
With the air filter removed, now’s the perfect time to clean it. Tap rigid filters on a workbench or the palm of your hand to dislodge grass clippings, leaves and other debris. Direct compressed air from the inside of the filter out to avoid lodging debris deeper into the media.Use soap and water to wash foam filters. If it’s been a few years, simply replace the filter; they’re inexpensive and mark the only line of defense against wear-causing debris entering your engine and wearing the cylinder and piston rings.
Check the spark plug
A dirty or bad spark plug may also be to blame. Remove the plug and inspect condition. A spark plug in a properly running four-stroke engine should last for years and never appear oily or burned. If so, replace it.Use a spark-plug tester to check for spark. If you don’t have one, clip the spark-plug boot onto the plug, hold the plug against the metal cylinder head and slowly pull the starter cord. You should see a strong, blue spark. It helps to test the plug in a darkened garage. Replace the plug if you don’t see a spark or it appears weak.
While you’re at it, check the spark-plug gap and set it to the factory specifications noted in the lawnmower owner’s manual.
If you know the plug is good, but you still don’t have spark, the coil likely has failed and requires replacement.Did you hit a rock or other obstacle?
We’ve all killed a lawnmower engine after hitting a rock or big tree root.If your lawnmower won’t start in this scenario, you probably sheared the flywheel key. It’s a tiny piece of metal that aligns the flywheel correctly to set the proper engine timing. Hitting an immovable obstacle can immediately stop the mower blade (and crankshaft) while the flywheel keeps spinning, shearing the key.
In this case, the engine timing is off and the mower won’t start until you pull the flywheel and replace the key. It’s an easy enough job IF you have a set of gear pullers lying around the garage. If not, rent a set from a parts store (or buy one…there’s never a bad reason to buy a new tool) or visit the dealer.
My lawnmower starts, but runs poorly
If you finally get the lawnmower started, but it runs like a three-legged dog, try cleaning the carburetor with AMSOIL Power Foam. It’s a potent cleaning agent designed to remove performance-robbing carbon, varnish and other gunk from carburetors and engines. |
| AMSOIL Power Foam Carb Cleaner |
Add gasoline stabilizer to avoid most of these problems
Which sounds better? Completing all these steps each year when your lawnmower won’t start? Or pouring a little gasoline stabilizer into your fuel tank?
Simply using a good gasoline stabilizer can help avoid most of the problems with a lawnmower that won’t start. AMSOIL Gasoline Stabilizer, for example, keeps fuel fresh up to 12 months. It helps prevent the lighter hydrocarbons from evaporating to reduce gum and varnish and keep the fuel flowing. It also contains corrosion inhibitors for additional protection.
 |
| AMSOIL Gasoline Stabilizer |
I have a five-gallon gas can in my garage from which I fuel two lawnmowers, two chainsaws, two snowblowers, a string trimmer, an ATV and the occasional brush fire. I treat the fuel with Gasoline Stabilizer every time I fill it so I never have to worry about the gas going bad and causing problems.
You can also use AMSOIL Quickshot. It’s designed primarily to clean carburetors and combustion chambers while addressing problems with ethanol. But it also provides short-term gasoline stabilization of up to six months.
Sludge or Slime in the Radiator
What causes radiator sludge/slime and what can you do about it?
• Additives dropping out: Coolant consists of a base (typically ethylene glycol or propylene glycol) mixed with additives and water. The base is primarily responsible for providing freeze and boil-over protection. The additives guard against corrosion, cavitation and scaling. Mixing of incompatible coolants can cause the additives to “drop out” of the solution and form sludge or slime.• Contaminated coolant: A bad head gasket or cracked cylinder head can allow oil and coolant to mix, resulting in sludge. In vehicles with automatic transmissions, the engine-cooling system also cools the transmission. A breach in the system can contaminate coolant with transmission fluid.
• Corrosion: Occurs when an imbalanced coolant chemically reacts with metallic surfaces, forming reddish deposits that can appear as sludge or slime.
 |
| Low-quality coolants can lead to cooling-system corrosion. |
Performing fluid analysis is the only way to definitively identify what’s causing sludge/slime in your radiator. The report can identify oil, transmission fluid or other contaminants in the coolant.
Fix any mechanical defects and flush the cooling system. Refill with a high-quality antifreeze/coolant.
What kind of coolant should I use?
Let’s start with what kind you should avoid.
You’re no doubt familiar with the conventional “green” coolants found at most retailers due to their low price. They contain inorganic salts, such as nitrites, phosphates and silicates.
Inorganic salts deplete quickly – typically in two years or less – and are on the environmental watch list. Once depleted, they are the source of common cooling-system problems, like scale deposits and sludge/slime.
 |
| Low-cost “green” coolants are the source of several problems, such as radiator sludge/slime and scale deposits. |
For these reasons, most vehicle manufacturers have moved away from inorganic salts.
And so should you.
Instead, use a high-quality coolant that uses organic-acid technology (known as OATs). OATS coolants are much more robust and longer-lasting. They virtually eliminate drop-out, scaling and compatibility issues inherent to inorganic salts. This type of coolant can be used in a wide variety of applications, even mixing with other coolants as a top-off.
AMSOIL Antifreeze/Coolants
AMSOIL offers three coolants, all of which offer a unique blend of organic acids. We use di-acid technology, which means both ends of the organic acid are active. This makes them work faster and form stronger bonds for enhanced protection.
AMSOIL Passenger Car & Light Truck Antifreeze & Coolant is formulated for all passenger cars and light trucks. It is premixed 50/50 with high-quality water.
 |
| AMSOIL Passenger Car & Light Truck Antifreeze & Coolant |
 |
| AMSOIL Heavy-Duty Antifreeze & Coolant |
 |
| AMSOIL Low Toxicity Antifreeze and Engine Coolant |
Zinc Wear Prevention in Motor Oil
Do Older Engines Need Oil With ZDDP Additives?
What is high-zinc motor oil?
Zinc dialkyldithiophosphate (ZDDP) is the most common zinc-based additive and is used primarily as an anti-wear agent to prevent premature engine wear. It also provides corrosion and oxidation protection.However, because the zinc and phosphorus found in ZDDP can negatively affect catalytic converters, it has been phased out of motor oil formulations in recent years.
Reducing ZDDP has drawbacks, as classic-car owners have found. Older vehicles with flat-tappet camshafts and, in particular, engines that include high-tension valve springs or other modifications that create high contact pressures, can suffer premature wear due to reduced ZDDP levels.For best protection, engine builders and gearheads typically use high-zinc and high-phosphorus motor oil to offer extra protection for flat-tappet cams, lifters and other components during break-in. AMSOIL Break-In Oil, for example, contains 2,200 ppm zinc and 2,000 ppm phosphorus.
 |
| Buy AMSOIL Break-in Oil |
How do ZDDP additives work?
ZDDP anti-wear additives are heat-activated, meaning they provide wear protection in areas of increased friction.
As temperatures rise and surfaces come closer together, ZDDP decomposes and the resulting chemistry protects critical metal surfaces. When parts move during operation, any sliding or rolling motion takes place on top of or within the ZDDP anti-wear film, which reduces metal-to-metal contact.
 |
| Flat Tappet Lifters |
This is especially important in engines with flat-tappet camshafts or engines modified to create more horsepower. High-tension valve springs, often used in racing applications, also increase the potential for cam wear and require additional ZDDP.
Flat-tappet cams vs. roller cams
The design of flat-tappet cams makes them especially vulnerable to wear. As the name indicates, the tappet – or lifter – is flat. During operation, the cam-lobe slides rapidly over the tappet, increasing friction and temperatures.A thin oil film is the only barrier that prevents the lifter and cam lobe from welding together.
If the oil film fails or provides insufficient wear protection, the two components can eventually wear the flat-tappet cam and affect valve operation. Engine power and efficiency can decline if the flat-tappet cam cannot lift the valves enough to adequately charge the chamber for ignition or release exhaust fumes. Because most V-8 engines of the muscle-car era came standard with flat-tappet cams, the problem is especially prevalent to classic-car and hot rod owners.Roller cams, on the other hand, are differentiated by rolling contact rather than sliding contact. Although costlier, roller cams are common in most modern vehicles and can be retrofitted into classic-car and hot-rod engines.
The role of piston rings
Even though Hugh didn’t ask about it specifically, I should also mention the importance of seating the piston rings during break-in.Although a new or freshly honed cylinder appears smooth to the naked eye, it actually contains microscopic peaks and valleys. If the valleys are too deep, they collect excess oil, which burns during combustion and leads to oil consumption.
The sharp peaks, meanwhile, provide insufficient area to allow the rings to seat tightly. That means highly pressurized combustion gases can blow past the rings and into the crankcase, reducing horsepower and contaminating the oil.
Breaking in the engine wears the cylinder-wall asperities, providing increased surface area for the rings to seat tightly. The result is maximum compression (i.e. power) and minimum oil consumption.
Do you always need an oil with ZDDP additives?
Do you need to use high-zinc motor oil in an older engine after break-in, which is typically about 500 miles?Yes, if you want to maintain horsepower and promote longevity.
Even after the cam has seasoned, it’s still exposed to tremendous heat and pressure, especially in a heavily modified or racing engine. The constant barrage of pressure can rupture the oil film responsible for preventing wear, leading to metal-to-metal contact.
After break-in, we recommend using an oil with at least 1,000 ppm ZDDP in a flat-tappet engine. That way, you’re providing your expensive engine with maximum protection against wear and horsepower loss.
AMSOIL Z-Rod Synthetic Motor Oil, our primary recommendation for classic cars and hot rods, contains more than 1,400 ppm zinc and more than 1,300 ppm phosphorus.
That’ll keep your classic car running for the long haul.
Friday, July 12, 2019
AMSOIL Signature Series
Signature Series: Maintains Protective Viscosity
The main bearings in your vehicle rely on an oil film thinner than a sheet of paper. When motor oil loses viscosity due to a process called shear, it can fail to provide the required level of wear protection.
Shear (often called mechanical shear) occurs when one layer of oil moves in the opposite direction of another layer of the same oil. This often occurs between the piston and cylinder wall. These two oil films move in opposite directions under intense heat and pressure.
AMSOIL synthetic motor oil features naturally shear-resistant base oils combined with top-tier viscosity improvers to withstand extreme heat and shearing forces. In fact, Signature Series fights viscosity breakdown better than the competition*, providing superior protection of pistons, cams and bearings.
Signature Series stands up to the potentially devastating effects of viscosity breakdown and provides maximum engine protection.
*Based on independent testing of AMSOIL Signature Series, Schaeffer’s Supreme 9000 Full Synthetic, Lucas Synthetic, Valvoline Conventional Daily Protection, Mobil 1 Annual Protection and Pennzoil 5W-30 in the Kurt OrbahnTest. Oils purchased on 5/3/18.
For product information on AMSOIL Synthetic Motor Oil.
Friday, December 14, 2018
Understanding European Motor Oil Standards
European Motor Oil Specifications Explained
It’s important to use the right motor oil for your European vehicle, but the sea of specifications can make it a challenge. AMSOIL European Car Formula finds the sweet spot of emission compatibility and complete engine protection for every application.
The European Automobile Manufacturers’ Association (ACEA) establishes lubricant standards for Europe, similar to the American Petroleum Institute (API) in the United States. ACEA recognizes that European engines differ from U.S. engines in both design and operating conditions. European OEMs often maintain their own motor oil performance specifications and play a larger role in their development than their U.S. counterparts. Volkswagen* drivers, for example, must use an oil that meets the requirements of VW’s own performance specs. The same holds for Mercedes*, BMW*, Porsche* and other European vehicles.
Many European vehicles available in North America today feature gasoline and diesel engines with emissions systems that are highly sensitive to the SAPS content of motor oil. These advanced emissions systems require lower SAPS formulations to properly function for a long period of time. The required formulations match the exacting engine oil specifications of ACEA and European OEMs to ensure they are compatible with current emissions systems while still providing engine protection.
EUROPEAN CAR FORMULA SYNTHETIC MOTOR OIL
- Engineered to meet or exceed European MANUFACTURERS.SPECIlCATIONS
- Balanced formulations that consider the needs of modern exhaust treatment devices
- Excellent protection for gasoline and diesel engines
- Fights sludge for superior engine cleanliness
*All trademarked names and images are the property of their respective owners and may be registered marks in some countries.No affiliation endorsement claim, express or implied, is made by their use. All products advertised here are developed by AMSOIL for use in the applications shown.
AMSOIL Severe Gear Synthetic Gear Lube Beats Mobil 1 & Valvoline
FOR THE ULTIMATE COLD-WEATHER PROTECTION, TRUST AMSOIL
Some gear lubes fail to meet basic low-temperature requirements.
Mobil 1 75W-140 Gear Oil, for example, failed to meet the requirements of the industry standard*. AMSOIL SEVERE GEAR®, on the other hand, delivers 20% more cold-temperature protection than the standard requires. It delivers better cold-temperature protection than Mobil 1 and Valvoline SynPower.
*Based upon results of samples of Mobil 1 75W-140 and Valvoline SynPower 75W-140 purchased in 2018 and tested in ASTM D2983 by an independent testing facility in May 2018. Samples sent blind to eliminate bias.
Thursday, December 13, 2018
Signature Series Keeps Engines Cleaner Than Other Synthetic Motor Oils
 |
| AMSOIL Signature Series |
In general, the higher an oil’s TBN, the better its ability to neutralize contaminants such as combustion by-products and acidic materials. Higher TBN oils neutralize a greater amount of acidic material, which results in longer oil life and cleaner engines.
TBN levels decrease as the oil remains in service. When the level reaches a point where it can no longer protect against corrosion, the oil must be changed.
The TBN Test
The Total Base Number Test (ASTM D2896) uses a series of chemical reactions to measure the alkaline additives in a motor oil. We recognize the value of formulating motor oils with high TBN, and AMSOIL Signature Series Synthetic Motor Oil features the highest TBN of the oils tested.
AMSOIL Signature Series is fortified with a heavy treatment of detergent additive and it delivers 30% more acid neutralizing power1 than Mobil 1, and 36% more than Royal Purple, helping engines to stay cleaner, longer.
The AMSOIL Advantage
AMSOIL synthetic lubricants feature a large dose of quality additives that consistently deliver high TBN for the life of the oil. They neutralize acidic contaminants and keep them in suspension to maximize engine protection. AMSOIL lubricants use detergent and dispersant additives to significantly reduce sludge and carbon deposit formation. In the Total Base Number Test (ASTM D2896), AMSOIL Signature Series 5W-30 Synthetic Motor Oil demonstrated the highest TBN of the oils featured in the test, helping it deliver reliable protection for extended drain intervals.
1Based upon independent testing of Mobil 1 Annual Protection Full Synthetic 5W-30, Royal Purple High Performance 5W-30 and AMSOIL Signature Series 5W-30 in ASTM D2896. Oils purchased 05/03/18.
All trademarked names and images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are developed by AMSOIL for use in the applications shown.
Subscribe to:
Posts (Atom)